Rubio Monocoat Precolor Easy – 1L – Mint White

Rubio Monocoat Precolor Easy is a pre-colour, designed to always be used in combination with the Rubio Monocoat Oil Plus 2C, to create special e_ects and contrasts. Enjoy unlimited creative possibilities thanks to the option to combine 4 different colours of Precolor Easy (which can be mixed with one another) with a finish in one of the 40 colours of the Rubio Monocoat Oil Plus 2C range. At the same time, the optimal molecular bonding of the Oil Plus 2C with the wood remains guaranteed.

Natural look
Water-based pre-treatment
4 unique colours
Unlimited combinations possible (all colours can be mixed with one another)
Can be applied to almost all wood types and wood species (solid wood, veneer, mdf, etc.)
Can be applied to all interior wood surfaces (caution, not advised on worktops)

Instructions on furniture and stairs:

STEP 1. Sand the surface scratch-free. Finish with screening net 100 to 150, the colour intensity depends on the sanding method used.
When renovating, you must remove all the residues from previous treatments completely (varnish, oil, wax, etc.).
STEP 2. Vacuum thoroughly and eliminate remains of dust with Cleaner. Wait until the surface is completely dry (check the technical datasheet of the Cleaner before use).
STEP 3. Stir the product thoroughly and regularly with a stirring stick.
STEP 4. Apply an amount of Precolor Easy with the Rubio Monocoat Brush and spread out using a red Scrubby Pad. Wipe out evenly with a lint-free cloth. Work in small areas to avoid overlapping.
STEP 5. Allow the surface to dry for 12 hours. The exact drying time depends on the foundation, moistening, temperature and ventilation.
STEP 6. After drying, break the raised wood fibers with a red Scrubby Pad and vacuum afterwards.
STEP 7. Now apply the Oil Plus 2C. Please consult the technical data sheet of the oil for a correct application. Be careful, in combination with Precolor Easy it is best to use a white Scrubby Pad instead of a beige or red one when applying the oil!

Instructions on floors:
STEP 1. Sand the surface scratch-free. Finish with screening net 100, the colour intensity depends on the sanding method used.
When renovating, you must remove all the residues from previous treatments completely (varnish, oil, wax, etc.).
STEP 2. Vacuum thoroughly and eliminate remains of dust with Cleaner. Wait until the surface is completely dry (check the technical datasheet of the Cleaner before use).
STEP 3. Tape off areas of 90 cm, in the lengthwise direction of the boards.
STEP 4. Stir the product thoroughly and regularly with a stirring stick.
STEP 5. Apply the Precolor Easy with a Microfiber Pad. Make sure to use enough of the product and cover the whole area. Afterwards smooth out the area again with the same Microfiber Pad. Make sure that this pad is thoroughly wrung out.
STEP 6. Now skip an area and follow the instructions in step 5 again for this next area. Finish the whole room in this way and remove the tape. Allow the surface to dry for 12 hours
STEP 7. Now tape off the untreated areas and apply the Precolor Easy as described in step 5. Repeat until the whole floor is treated. Afterwards remove the tape (tip: step on the already dried out areas to remove the tape).
STEP 8. Allow the surface to dry for 12 hours. The exact drying time depends on the foundation, moistening, temperature and ventilation.
STEP 9. After drying, break the raised wood fibers with a floor polisher equipped with a red Pad and vacuum afterwards.
STEP 10. Now apply the Oil Plus 2C. Please consult the technical data sheet of the oil for a correct application. Be careful, in combination with Precolor Easy it is best to use a white Pad instead of a beige or red one when applying the oil!

Instructions for Industrial application: If you want to apply this product in an industrial manner, we advise you to get in contact with our technical service team.

What’s in the box
1 x 1L Precolor Easy variant color selected