Submersible wastewater pumps – SEG.40.12.2.50B

SEG.40.12.2.50B

Grundfos SEG grinder pumps are non-self-priming, single-stage, centrifugal pumps with horizontal discharge port, specifically designed for pumping wastewater containing discharge from toilets. The pump is equipped with a grinder system that grinds destructible solids into small pieces to lead them through pipes with a relatively small diameter. SEG grinder pumps are ideal for use in sparsely populated areas, where gravity sewage systems are not available. Examples include villages, farm areas and areas with large terrain-level differences, where a pressurised system has advantages. The pump is available for two types of installation:
submerged installation on auto-coupling systems
submerged installation, free-standing.
The pump is made of wear-resistant materials, such as cast iron and stainless steel. These materials ensure reliable operation. The surface of the pump is smooth to prevent dirt and impurities from sticking. The corrosion-resistant stainless-steel clamp is securing the motor to the pump housing and allow the easy service of the pump. Smart Trim system allows easy adjustment of the impeller clearance to ensure maximum efficiency during the pump lifespan. The range is designed to reduce energy consumption and keep downtime costs to a minimum, while maintaining peak performance throughout the lifespan of the system.

Controls:

Moisture sensor: N
AUTOADAPT: No

Liquid:

Liquid temperature range: 0 . 40 C
Selected liquid temperature: 20 C
Density: 998.2 kg/m

Technical:

Type of impeller: GRINDER SYSTEM
Primary shaft seal: SIC/SIC
Approvals: PA-I
Curve tolerance: ISO9906:2012 3B2

Materials:

Pump housing: Cast iron
EN1561 EN-GJL-200
Impeller: Cast iron
EN1561 EN-GJL-200

Installation:

Maximum ambient temperature: 40 C
Maximum operating pressure: 6 bar
Flange standard: DIN
Pipework connection: DN 40/50
Pump outlet: DN 40
Pressure rating: PN 10
Maximum installation depth: 7 m
Auto-coupling: 96076063

Electrical data:

Power input – P1: 1.6 kW
Rated power – P2: 1.2 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 400-415 V
Voltage tolerance: +6/-10 %
Max starts per hour: 30
Rated current: 3 A
Starting current: 21 A
Rated current at no load: 2.1 A
Cos phi – power factor: 0.81
Cos phi – p.f. at 3/4 load: 0.72
Cos phi – p.f. at 1/2 load: 0.58
Rated speed: 2750 rpm
Moment of inertia: 0.0038 kg m
Motor efficiency at full load: 73 %
Motor efficiency at 3/4 load: 71 %
Motor efficiency at 1/2 load: 66 %
Number of poles: 2
Start. Method DOL
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Explosion proof: no
Length of cable: 10 m
Cable type: 07RN8-F
Type of cable plug: No plug

Others:

Net weight: 42.5 kg
Danish VVS No.: 391342131
Swedish RSK No.: 5885829
Finnish LVI No.: 4836103
Norwegian NRF no.: 9045801
Country of origin: HU
Custom tariff no.: 84137025

What’s in the box
1 x Pump
1 x Manual