The Triple Stage Home Water Filtration is a simple way of removing unwanted particles from the water supply to your home.
With this Option the Slimline Filters are pre-built on to a single wall-mountable bracket, making it easy to move and easy to install with just a single inlet and outlet.
Keep in mind:
These systems do not remove bacteria and other micro-organisms that may be in the water. If the water quality in your area is a real problem, you may want to consider a more advanced filtration system, such as the Complete Home Ultra Filtration Solution.
The carbon block and sediment Filters need to be replaced every 3 – 6 months, depending on the source waters quality.
Minerals and pesticides are too small to be removed by the filters in this filtration unit.
You will require some plumbing knowledge and experience to install the system successfully.
This system is designed for the filtration of municipal water. If you make use of a different water source, such as a bore hole, consult our Source-Water Filtration Solution guide.
These filters do not remove lime, minerals or metals from the water. As a result of this, the water may remain cloudy or tinted, and may not come out crystal clear.
These systems typically filter water at a peak flow rate of 1200 liters per hour.
The filter housings have a maximum operating pressure of 6-bar. If you suspect that your water pressure will at any time exceed 5-bar, a pressure regulator must be installed before the filter housing. This action will guard against the water pressure exceeding the maximum pressure rating. It is recommended that the pressure regulator be set at 4.5-bar psi or less.
Protect the filter housing from freezing, as this can cause the housing to crack
Whats in the box
1x 3-stage Big Blue Filter unit on Floor Stand
3x Filter Cartridges Sealed in Plastic (melt blown sediment filter, carbon block, GAC filter)
1x Housing Wrench