Victron Energy SmartSolar Charge Controller MPPT 250/85

Solar charge controller:
The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

Control Your Charger Remotely:
The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.

Daisy Chain Additional Units:
The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units.When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.

Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.

Battery voltage: 24 V Auto Select (36 V: manual)
Rated charge current: 85 A
Nominal PV power, 12 V 1a,b): 1200 W
Nominal PV power, 24 V 1a,b): 2400 W
Nominal PV power, 36 V 1a,b): 3600 W
Nominal PV power, 48 V 1a,b): 4900 W
Max. PV short circuit current 2): 70 A (max 30 A per MC4 conn.)
Maximum PV open circuit voltage: 250 V absolute maximum coldest conditions, 245 V start-up and operating maximum
Maximum efficiency: 99 %
Data communication: VE.Can, VE.Direct and Bluetooth

What’s in the box
1 x SmartSolar MPPT 250/85-Tr VE.Can