Description

Waterfall Flow Pumps produces super large flow, ideal for moving large volumes of water through filtration systems or creating a stream or waterfall and is suitable for both submersible pond and in-line on land use. The vortex impeller is efficient & energy saving. The ceramic bearing & shaft provides longer pump life-span with better corrosion resistance.

The simple 'no-tool' clip together design makes it easy to disassemble / assemble the inlet housing cover quickly & conveniently. Built-in thermal overload switch has a self-resetting feature to ensure safe operation of the pump, even in strenuous conditions. The unique outer housing design alleviates blockages and the pump has a built-in filter. The pump also has an adjustable flow control feature to allow less water than the maximum to be pumped, should this be required.

For in-line on land use, disassemble the inlet housing and fit the supplied threaded fitting to the pump inlet. The pump Does Not have suction / lift capability which means it needs to be installed below the level of the water and then flooded for it to be used in in-line on land mode.

Features:

- Continuous Duty

- Salt & Fresh Water

- Koi & Pond Safe

- Adjustable Flow Rate

- Built in Filter

- Suitable for both Indoor & Outdoor Use

- Eco-design motor set to run at maximum efficiency

- Long Life Vortex Impeller

- Thermal Overload Protection

Max Head / Water Cut-Off Height is at 1.8m. Please refer to the supplied Height / Flow Chart to determine the flow capabilities of the pump.

Specifications:

- Voltage: 220 - 240 V at 50Hz

- Power: 5W

- Max Head / Water Cut-Off Height: 0.9m

2x Hose attachments

What's in the box
1 x Pump
3 x Hose attachments