The burglar alarm is a unique product protected by intellectual property law. It is not merely a simple alarm-it is the result of the collective efforts of a large team of professionals. We prioritise user safety and continuously monitor product quality. Please be wary of counterfeit and cheap products; they do exist, may be dangerous, and are particularly ineffective at protecting your home.

Magnetic sensor alarm: When the burglar alarm is triggered, it immediately emits a loud and jarring sound.

The alarm operates on 2 AAA batteries (not included in the pack).

DIY pairing: One remote control can be paired with 50 alarms, and one alarm can be paired with 8 remote controls.

You can switch between four modes:

1. Armed mode. The alarm will sound automatically when doors or windows are opened; it will also sound when doors or windows are closed. Important note: if a door or window is closed and the sensor makes contact again, the alarm will sound. The alarm will continue to sound until it is disarmed or the sensor makes contact again (by closing the door or window).

2. Disarmed Mode. Selecting this mode completely deactivates the alarm.

3. Emergency Alarm Mode. Selecting this mode triggers a 30-second alarm, which can be used to scare off burglars or alert others for help.

4. Doorbell Mode. When this mode is selected, a chime sounds every time the door is opened.

Easy Installation: Installing the alarm is very simple

Sound output up to 108 decibels: Once triggered, this alarm emits a sound of up to 108 decibels, making it an excellent tool for protecting your home. The moment the alarm sounds, intruders will flee, and the loud noise will cause panic.

Suitable for home security, domestic use and the protection of private property.

Quick installation without tools

Magnetic door and window sensor

Remote control activation/deactivation

Two operating modes: Alarm / Door-open warning bell.

Loud alarm volume: 108 dB

Alarm power supply: 2 x AAA alkaline batteries (not included)

Remote control battery power: 27Ax12V (included)

Battery life: 1 year

Sensor dimensions: 85 x 40 x 15 mm

Sensor weight: 37 g

Alarm remote control synchronisation procedure (if the alarm does not sound when the remote control is pressed):

1) Remove the two AAA batteries from the alarm unit

2) Insert the two batteries into the alarm unit - this will emit a specific sound

3) Press and hold the button marked with the bell symbol for 5 seconds until the alarm sounds a confirmation tone

4) Briefly press the start button (the lock is now disengaged); the alarm will emit a confirmation tone

5) Briefly press the button marked with the alarm bell symbol; a confirmation tone will sound

6) The alarm and remote control are now synchronised; you may use it

What's in the box
1 x Siren
1 x Remote Control
1 x Double-sided Adhesive Tape