Feature: 1. Imported high-quality motor steel sheets, bearings made of German technology, low self-inductance, good responsiveness.
2. The product can be directly connected to the load and run at low speed in a state of close to a locked rotor without gear reduction.
3. The inner rotor adopts German technology, and the surface is coated with imported rotor glue to prevent burrs on the surface after carbon steel oxidation and grinding, resulting in increased motor noise.
4. The front and rear covers are perfectly connected, the body is black electrophoresis, high-end atmosphere, and the body size is standard.
5. Quick start and stop, frequent forward and reverse rotation, precise control, the number of pulses determines the motor position.
Specification: Item Type: Electric Motor Material: Carbon steel
Purpose: Industrial motor control, transmission and transmission occasions
Step Angle: 1.8
Voltage: Determined by the equipped driver, no fixed voltage
Current: 4A
Holding Torsion: 3.2N.m
Resistance: 0.7
Inductance: 1.8mH/phase
Length: Approx. 86mm / 3.4in
Number of Outlets: 4
Shaft Type: Milling single flat table
Step Angle Accuracy: 5% (full step)
Resistance Accuracy: 10% (20 )
Inductance Accuracy: 20% (1KHZ)
Temperature Rise: 80 maximum (rated current, 2-phase energization)
Ambient Temperature: -20 ~+50
Insulation Resistance: 100M Min, 500VDC
Withstand Voltage: 500VAC for one minute
Radial Clearance: 0.02mm maximum (450g load)
Axial Clearance: 0.08mm maximum (450g load)
Maximum Radial Load: 75N (20mm from flange surface)
Maximum Axial Load: 15N
Package List: 1 x Electric Motor
Note: 1. When connecting the motor to the driver, do not connect the wrong phase. 2. Due to different driving conditions, the motor may have obvious heat generation. The surface temperature of the motor is not allowed to exceed 85 C during operation. 3. When installing the motor, be sure to use the front end cover of the motor for positioning, and pay attention to tolerances to ensure the concentricity of the motor shaft and the load.

What's in the box
1 x Electric Motor