Give an older Centurion gate motor a practical new lease on life with this generic 12V 2A replacement power supply, designed for use with Centurion D3, D5 and D5 Evo gate motor systems.
It is intended as an alternative to the original power supply when the existing charger has failed. The compact enclosure fits into the original power-supply area and provides the necessary connections for mains input and 12V battery charging.
The unit includes a 3-position E-N-L terminal connection for the 230V AC supply, a pre-attached 2-pin DC output connector, as well as a dedicated earth wire for fault-current protection.
Unlike the original Centurion power supply, this replacement does not use the original slide-in mounting rails. It fits into the same general bay and can be secured appropriately inside the gate motor housing.
Key Features
- Generic replacement power supply for selected Centurion gate motors
- Compatible with Centurion D3, D5 and D5 Evo
- Designed for systems using a 12V SLA / lead-acid backup battery
- 12V DC charging output
- Pre-attached 2-pin DC connector
- E-N-L screw-terminal AC input
- Separate earth lead for fault-current protection
- Compact vented enclosure assists with heat dissipation
- Fits within the original power-supply area
- Suitable when the original charger/power supply has failed
Compatibility
Suitable for:
- Centurion D3
- Centurion D5
- Centurion D5 Evo
Important: This is a generic third-party replacement component and is not an original Centurion-branded power supply.
Technical Details
- Input: 230V AC
- AC Connection: E - N - L terminal
- Output: 12V DC
- Rated Output: 12V 2A
- DC Connection: Pre-attached 2-pin connector
- Battery Type: Intended for compatible 12V SLA / lead-acid gate motor batteries
- Housing: Vented plastic enclosure
- Mounting: Fits into the existing power-supply area but does not use the OEM slide-in rails
Installation Notes
Installation involves working with 230V mains electricity and should be carried out by a suitably qualified or experienced person.
Before installation, isolate the mains supply and disconnect the gate motor battery. Connections should be made according to the markings on the unit:
- E: Earth
- N: Neutral
- L: Live
The separate earth lead should be connected to the appropriate earthing point, while the pre-wired 2-pin DC plug connects to the compatible gate motor control board.
Once installed, ensure the power supply is securely positioned inside the motor housing and verify that the battery is charging correctly.
What's in the box
1 x Generic 12V 2A Gate Motor Power Supply
1 x 3-Pin AC Terminal Block (E-N-L)
