MAC AFRIC 460 x 1500 MM Lathe

Technical Specifications

Feature	Specification
Swing Over Bed	410 mm
Swing Over Cross Slide	224 mm
Swing in Gap (Diameter × Width)	640 × 240 mm
Centre Height	205 mm
Distance Between Centres	760 / 1,010 / 1,515 / 1500 mm
Bed Width	300 mm
Maximum Cutting Tool Section	25 × 25 mm
Cross-Slide Travel	290 mm
Top-Slide Travel	128 mm
Spindle Bore	Ø58 mm
Spindle Nose	D1-6″
Spindle Morse Taper (Nose / Sleeve)	MT6 / MT4
Number of Spindle Speeds	12
Spindle Speed Range	25–2,000 rpm
Leadscrew Diameter and Thread	Ø35 mm × 4 TPI or 6 mm pitch
Imperial Thread Range	2–112 TPI, 60 selections
Metric Thread Range	0.1–14 mm, 41 selections
Diametral Pitch Range	4–112 DP, 50 selections
Module Pitch Range	0.1–7, 34 selections
Imperial Longitudinal Feed Range	0.0011″–0.0633″/rev, 42 selections
Metric Longitudinal Feed Range	0.031–1.7 mm/rev, 42 selections
Imperial Cross-Feed Range	0.00033″–0.01837″/rev, 42 selections
Metric Cross-Feed Range	0.014–0.784 mm/rev, 42 selections
Tailstock Quill Travel	123 mm
Tailstock Quill Diameter	Ø60 mm
Tailstock Quill Taper	MT4
Spindle Drive Motor	5 hp or 7.5 hp, 4-pole, 3-phase
Coolant Pump Motor	1/8 hp, 2-pole, 3-phase

Key Features

• 410 mm swing over bed.
• 224 mm swing over cross slide.
• 640 × 240 mm swing in gap.
• Available with 760 mm, 1,010 mm, 1,515 mm, or 2,010 mm distance between centres.
• 300 mm bed width.
• Ø58 mm spindle bore with D1-6″ spindle nose.
• 12 spindle speeds from 25–2,000 rpm.
• Supports imperial, metric, diametral pitch, and module threading.
• Tailstock with Ø60 mm quill, 123 mm travel, and MT4 taper.
• Available with 5 hp or 7.5 hp three-phase spindle motor.