The Muc-Off Tubeless Rim Tape is made from our own proprietary performance material with a pressure-sensitive adhesive to provide just the right amount of stretch whilst maintaining the durability and strength needed to create a lasting airtight seal. It's semi-transparent material makes locating the valve hole easy. Supplied with 4x Seal Patches.
Available in 10m roll, in 5 widths to suit most Road, CX, Gravel, MTB and Plus-sized rims.
Product Highlights:
- The tape itself is made from a semi-transparent material so that you can still easily locate your valve hole
- Infamous Muc-Off pink so even the inside of your rims stay looking fresh AF
- Comes with four seal patches, so you're never caught short
- Comes in 5 different widths to suit most Road, CX, Gravel, MTB and Plus-sized rims
- Extreme strength and durability
- Pressure sensitive adhesive ensures the ultimate air-tight seal
- Engineered to stretch to fit perfectly in the contour of your rim
How to Use:
- Step 1: First up, clean your rim using our Glue & Selant remover to get rid of any unwanted residue that might be left behind from a previous setup
- Step 2: Select the correct sized rim tape to match up with the width of your wheel's rim (check out our guide above)
- Step 3: Locate the valve hole
- Step 4: Peel back some of your Rim Tape and begin to apply and press down on the opposite side to your valve hole
- Step 5: With your thumb holding down the tape, lightly peel the tape back and continue to press down to ensure you've got a firm bond with the rim itself
- Step 6: Rotate the wheel around as you continue to apply the tape
- Step 7: Once you've gone all the way around the rim, continue on to create an overlap of around 10 - 15cms
- Step 8: Cut the tape at a 45 degree angle and press the edge down
- Step 9: Check for any air bubbles and gaps, ensuring to press down firmly if you do spot any
- Step 10: Apply the finishing patch over the edge of the tape to ensure a firm seal
- Step 11: Push the valve through the rim hole and secure with the 'O' ring and locking ring
- Step 12: Refit the tyre and inflate - you're now ready to add your sealant!
What's in the box
1 x 10m Rim Tape Roll
4 x seal patches
