System requirements: Android 5.0 and above; iOS9.0 and above; support Bluetooth 4.0.

Device Connection

For the first time use, you need to connect the APP for calibration, after successful connection, the bracelet will automatically synchronise the time

Open the Bluetooth switch of the mobile phone system Go to the app device module settings Click on the 'Bind Device, Experience More Functions' to enter, it will automatically search for the nearby Bluetooth devices of the bracelet, locate the device of the bracelet and connect it with it.

After is paired successfully, a guide page will pop up on the APP side, according to the guideline, jump to the mobile phone system Bluetooth search to find the WellAudio device and connect it, and you can make/receive phone calls and listen to music after the connection is successful. (Remarks: If the mobile phone system Bluetooth has been searching for the WellAudio device but not able to find the WellAudio device, please go to the Dual mode menu and set it to be on, and then click 'Connect to WellAudio device'. You can't make calls without connecting WellAudio device.)

APP will automatically save the Bluetooth address of the bracelet, APP will automatically search and connect the bracelet when it is opened or running in the background;

Android mobile phone use to read contact information and other notification permissions and mobile phone settings to give the APP running in the background.

Bracelet function description

Button: long press 2 seconds to switch on/off; short press on any page to return to dial; short press on dial page to extinguish the screen.

standby page slide up to enter notification reminder, slide up to enter control centre.

standby page slide left and right to cycle switch dial.

standby dial page long press 2 seconds can start the language assistant. (Note: mobile phones need to be connected to the WellAudio device at the same time, and the smartphone side needs to set up the voice of the user in the voice menu in advance)

standby page tap the screen to enter the main menu

Bracelet reset the device This function will clear all the data of the bracelet (such as step counting).

switch to the heart rate 3-in-1 interface to enter the start of the test, heart rate 3-in-1 interface 60s timeout automatically extinguish the screen (heart rate and blood pressure need to be supported by the bracelet hardware).

Clock interface

After synchronisation with mobile phone, the bracelet will automatically calibrate the time;

Step counting

Exercise steps

Wearing the bracelet, record the number of steps taken every day, you can view the current real-time steps.

Distance

According to the number of walking steps, estimate the exercise distance.

Calories

Estimated calories consumed according to the number of steps walked

Heart Rate, Blood Pressure, Blood Oxygen 3-in-1

Enter the heart rate 3-in-1 test interface and wait for a few seconds, then the current test results of heart rate, blood pressure and blood oxygen will be displayed. This function requires the bracelet to support heart rate and blood pressure sensors.

Dialling

Dialpad to make a call (Note: the mobile phone needs to be connected to the WellAudio device at the same time)

Phonebook

Add 8 frequently used contacts in APP, after the successful Bluetooth connection between the bracelet and APP, the contacts can be synchronised to the phonebook of the bracelet, click on the contacts to make a call (Note: the mobile phone needs to be connected to the WellAudio device at the same time)

Music Control

The bracelet can be used to control the switching of the previous song, the next song, and the pause/start of the playback. (Note: the mobile phone needs to be connected to WellAudio device to use this function)

Dual-mode switch

You need to open this switch for the mobile phone to search for WellAudio device, if the mobile phone is not connected to WellAudio device within 5 minutes after the bracelet is switched on, the switch will be closed automatically, and you need to open it manually when you use it again.

Note: Connecting to the WellAudio device for 5 minutes without using it will turn off the WellAudio function automatically. Note: Connecting the WellAudio device and not using it for 5 minutes will automatically turn off the WellAudio function, if you turn on the music player, dialling pad, phone book, voice and other related functions again, it will be activated automatically and can be used normally.

Multi-exercise

Running mode

Sit-up mode

Open-close jump mode

Volleyball mode

Basketball mode

Badminton mode

Cycling mode

Tennis mode

Sleep Mode

When you fall asleep, the bracelet will automatically enter the sleep monitoring mode; it will automatically detect the number of times you sleep deeply/lightly/wakefulness in the whole night, and calculate the quality of your sleep; the bracelet will only display the total length of deep sleep/light sleep/wakefulness, and you can check the details of the sleep data on the APP side.

Note: Sleep data will be available only when you wear the bracelet to sleep and start to detect sleep from 10:00 p.m. Sleep data can be synchronised to the app while you sleep for 3/4 hours.

Message Mode

When the bracelet pushes more than one reminder message, enter this interface to view the last 3 message records

Stopwatch Function

Enter the stopwatch and click the start button to start the timer, click the pause button to stop it, and click the reset button to clear the timer.

Weather

Connection to APP is successful, the bracelet can get the current weather data, APP end settings - personal information - can set the temperature unit switch (Celsius and Fahrenheit conversion)

More menus

1.About - you can view the project version number and Bluetooth name and other information.

2.Language--Device side can set the language directly (connecting to APP will automatically synchronise with the current language of APP).

3.Time/Date--Device side can set the time and date

Custom dial

need to connect to APP to get the dial settings, you can choose the recommended dial/default dial/album custom dial to sync to the bracelet.

APP Functions and Settings

Personal Information

Please set your personal information after entering APP

Settings Personal Information, you can set your gender-age-height-weight-distance.

You can also set your daily target steps to monitor the daily completion.

App Push

SMS Reminder:

Under the connection state, if you enable the SMS reminder function, the bracelet will vibrate to remind you when there is a text message.

Other Alerts:

Under the connection state, if this function is enabled, the bracelet will vibrate to remind when there are messages from WeChat, QQ, Facebook, etc., and display the content received by the app (you can also go into the information menu of the bracelet to check the recent message records) (you need to give the app access to the system notification privileges, and the number of words can be displayed on the bracelet side is 20-40).

Note: Incoming call push needs to be connected to WellAudio device.

Other Functions:

Turn on vibration to set this function, then the bracelet will vibrate when there is an incoming call, message or other reminders, if you turn it off, the bracelet will only have a screen reminder without vibration, so as not to disturb.

Warm tips for Android users.

To use the reminder function, you need to set it to allow "FitPro" to run in the background; it is recommended to add "FitPro" as trust and open all the permissions in the permission management.

Alarm Settings

When connected, you can set 8 alarms, after setting, it will be synchronised to the bracelet; support offline alarms, after successful synchronisation, even if the APP is not connected, the bracelet will remind you according to the set time.

Finding the bracelet

Under the connection status, click 'Find Bracelet' option, the bracelet will vibrate.

Remote Control Photo

In the connected state, start to take photo from the bracelet side or enter the remote control photo interface from the APP side, shake/flip the wrist/touch the bracelet, the photo will be taken automatically after 3 seconds countdown, please allow the APP to access the photo album to save the self-taken photos.

Sedentary Reminder

Set whether to turn on the sedentary reminder function or not, you can set the reminder interval, if you sit for a long time within the set time, the bracelet will remind you.

Lift your hand to light up the screen

Enable this function when the bracelet is resting on the screen, lift your wrist to turn the screen to yourself to light up the screen, and the screen will go out when you put it down

Do Not Disturb Mode

Enable Do Not Disturb Mode function, you can set the Do Not Disturb time period, and the bracelet stops receiving notification messages within the set period of time, so as to avoid disturbing the reminder messages

Reset the device

Reset the device This function clears all the data of the bracelet (e.g., step counting)

Remove Device

Remove Device This function clears data and removes the device Basic Parameter Clear data and remove the device

Basic Parameters

Device Type Smart Bracelet Battery Type Lithium Polymer

Vibration Motor Support Sync Mode Bluetooth 4.0

Operating Temperature -10 ~50 Sensor Low-power Acceleration Sensor

System Requirements IOS9 or above/Android5.0 or above

Cautions

1. Should not be worn while bathing or swimming.

2. Please connect the bracelet when synchronising data.

3. Use the charging cable to charge.

4.Don't expose the bracelet to high moisture, extremely high or low temperature for a long time.

5.If the bracelet appears to die and restart, please check the memory information of the mobile phone to clear it and try again, or quit the APP to reopen it.

Parts Introduction

xHost xWristband xCharging cable xPacking box and instructions

What's in the box
1xHost
1xWristband
1xCharging cable
1xPacking box and instructions