Waterfall Submersible / Inline Flow Water Pump 1500 L/H

Waterfall Flow Pumps produces super large flow, ideal for moving large volumes of water through filtration systems or creating a stream or waterfall and is suitable for both submersible pond and in-line on land use.

The vortex impeller is efficient & energy saving.
The ceramic bearing & shaft provides longer pump life-span with better corrosion resistance.
The simple 'no-tool' clip together design makes it easy to disassemble/assemble the inlet housing cover quickly & conveniently.
Built-in thermal overload switch has a self-resetting feature to ensure safe operation of the pump, even in strenuous conditions.
The unique outer housing design alleviates blockages and the pump has a built-in filter.
The pump also has an adjustable flow control feature to allow less water than the maximum to be pumped, should this be required.
For in-line on land use, disassemble the inlet housing and fit the supplied threaded fitting to the pump inlet. The pump Does Not have suction/lift capability which means it needs to be installed below the level of the water and then flooded for it to be used in in-line on land mode.

Features:
- Continuous Duty
- Salt & Fresh Water
- Koi & Pond Safe
- Adjustable Flow Rate
- Built-in Filter
- Suitable for both Indoor & Outdoor Use
- Eco-design motor set to run at maximum efficiency
- Long Life Vortex Impeller
- Thermal Overload Protection
Max Head / Water Cut-Off Height is at 1.8m. Please refer to the supplied Height / Flow Chart to determine the flow capabilities of the pump.

Specifications:
- Voltage: 220 - 240 V at 50Hz
- Power: 20W
- Max Head / Water Cut-Off Height: 2.0m
- Cable Length: 10m

What's in the box
1 x Pump