Aneng Intelligent Auto Select Multimeter Tester

With this intelligent multimeter it will select what you are measuring by itself. It will pick up if it is ac or dc or any other available option the meter has to offer in auto mode.

Full range overload protection.

Max. display value: SZ02 9999 digits

Automatic shut down time: 15 minutes

Sampling time: about 3 times/second

Power supply: 2×1.5V AAA Battery (included)

SZ02: The max voltage between the measuring end and the ground is 1000V dc or 750v ac.

The instrument specifies one year as a cycle, and shall be re-calibrated under 18 ~28 , with relative humidity less than 75%.

Model: Aneng SZ02

AC current: 999.9mA/10A

DC current: 999.9mA/10A

DC voltage: 600.0mV/9.999V/99.99V/999.9V

AC voltage: 600.0mV/9.999V/99.99V/999.9V

Line on-off Test: 1

Resistance: 999.9 /9.999k /99.99k /999.9k /9.999M /99.99M

Diode Test: 1V

Capacitor: 9.999nF/999.9nF/9.999uF/99.99uF/999.9uF/9.999mF/99.99mF

NCV: yes

Temperature: -40~1000 /-40~1832

Frequency: 1000Hz

Features:

Features a clear and easy-to-read lcd display, with backlight for easy read under the low light mode.

Automatic selection of measuring function and range.

Long press the ncv button to enter the ncv mode, use the top ncv sensor the approach the ac voltage, which is safer to test.

Measures ac/dc voltage, dc/ac current, resistance, capacitance, diode, temperature, and zero/live wire identification, temperature ,ncv

What’s in the box
1x AnengTester
1x Instruction manual
1xTest lead (black and red)
1xTempreture line
1x 16 in 1 combination cable with attachments
1x Storage Bag
2×1.5V AAA Battery