Hantek2D72 70MHz Handheld Oscilloscope, Signal Generator & Multimeter

The Hantek-2D72 is a handheld Oscilloscope, Multimeter and Signal Generator in one handy multitester format.  The Hantek2D72 is lightweight and compact with low power consumption.  It has a USB-C charging interface and charges in 2 hours for a full day of usage.  This multi-tester has a high-resolution colour-LCD screen and minimalist keyboard design. The ideal electronic tester for the beginner, fieldwork and as a handy tester on your desk.

Technical Specifications:

– Bandwidth: 70MHz, 2CH + DMM + AWG
– Sample Rate: 250MSa/s (Single-channel), 125MSa/s (Dual-channel)
– Record Length: Max. 6K for 1-ch; 3K samples / dual-ch
– SEC/DIV Range: 5ns/div ~ 500s/div 1,2,5 sequence
– Volts/div Range: 10mV/div ~ 10V/div
– Low-Frequency Response (-3db): ?10Hz at BNC
– Arbitrary Waveform Generator Mode: 1Hz ~ 25MHz
– DMM: 4000 Counts, Voltage, Current, Resistance, Capacitance, Diode & On-Off
– DMM Input Impedance: 10M-ohm
– DMM DC Voltage: 400mV ~ 600V
– DMM AC Voltage: 4V ~ 600V
– DMM DC/DC Current: 40mA ~ 10A
– DMM Resistance: 400-ohm ~ 40M-ohm
– DMM Capacitance: 40nF ~ 100uF
– DMM Diode: 0V ~ 1.0V
– Display: 2.8 inches 64K colour TFT
– Dimensions: 199 x 98 x 40mm (L x W x H)
– Weight: 624g

Product features:

Oscilloscope + Multimeter + Waveform Generator.
Intelligent charging control: Lithium batteries can be charged by either high current 5V/2A or an ordinary computer USB interface. Allows for use during charging.
Ultra-low power design: recharge of 2 hours gives a full day of use.
Large-capacity lithium battery power supply: 18650 replaceable lithium battery power system.
5V/2A charger + Type C charging cable: Type C power + data transfer interface, can charge with a phone charger.
AUTO one-key test: Magic tool and essential function for the test newbie.
Small volume, one-hand operation: The 45-degree suspension bracket design provides you with a workstation anywhere anytime.
One key page out, quick comparison of two groups of reference waveforms + 6 groups of waveform storage, simple and effective.
Digital voltmeter function: automatic frequency and amplitude measurement.
Cursor measurement function supports time and voltage manual measurement and measures the required waveforms accurately.
Colour LCD screen: displays waveforms clear and undistorted when magnified.
Minimalist keyboard design simplifies operation.
Unibody casing: fine touch feeling, good impact resistance, outstanding heat resistance, easy to disassemble.
Self-calibration function: free from level drift after long periods unused.
Universal multimeter function: voltage, current, resistance, diode, capacitor, on-off test.
Video help: scan code on back of machine to get video help.
The PC software supports Windows 7/8/10 – 32-bit and 64-bit.

What’s in the box
1 x Hantek2D72 Multitester
1 x Oscilloscope Test Probe
2 x Multimeter Test Leads
2 x BNC-Alligator Cables
USB cable to connect the oscilloscope to your PC
Power Adapter
Carry Case
CD with User Manual & PC-Software.