Nxp (2094314) Microcontroller, MCU, ARM Cortex-M4, 32bit, 204 MHz, 200 KB

Description:
ARM MCU, LPC Family LPC4300 Series Microcontrollers, ARM Cortex-M4, 32bit, 204 MHz, 200 KB

Product Information:
Product Range: LPC Family LPC4300 Series Microcontrollers
Architecture: ARM Cortex-M4
No. of Bits: 32bit
CPU Speed: 204MHz
Program Memory Size: –
RAM Memory Size: 200KB
No. of Pins: 144Pins
MCU Case Style: LQFP
No. of I/O’s: 83I/O’s
Embedded Interface Type: CAN, I2C, I2S, SPI, UART
Supply Voltage Min: 2.2V
Supply Voltage Max: 3.6V
MCU Family: LPC
MCU Series: LPC4300

Product Overview:
The LPC4320FBD144,551 is a 32-bit Microcontroller based on ARM Cortex-M4 digital signal controller with an ARM Cortex-M0 coprocessor operates at a maximum frequency of 204MHz. The ARM Cortex-M4 core offers single-cycle Multiply-Accumulate and SIMD instructions and a hardware floating-point unit to support signal processing while the M0 coprocessor handles I/O and digital control processing. The device incorporates 200kB internal RAM, one high speed USB 2.0 Host/OTG/Device, 8-channel 10-bit A/D converter, 10-bit D/A converter and 83 general-purpose I/O pins. This device also features peripherals like four UARTs, two I2C, three SPI modules and two I2S. The ARM Cortex-M0 coprocessor is code and tool compatible with the Cortex-M4 core. The Cortex-M0 coprocessor offers with a simple instruction set and reduced code size and hardware multiply is implemented as a 32-cycle iterative multiplier.

Built-in memory protection unit (MPU) supporting eight regions
Built-in nested vectored interrupt controller (NVIC)
Hardware floating-point unit
Non-maskable Interrupt (NMI) input
JTAG and serial wire debug (SWD), serial trace, eight breakpoints and four watch points
Enhanced trace module (ETM) and Enhanced trace buffer (ETB) support
System tick timer
Crystal oscillator with an operating range of 1MHz to 25MHz
12MHz Internal RC (IRC) oscillator trimmed to 1.5 % accuracy
Ultra-low power real-time clock (RTC) crystal oscillator
Serial GPIO (SGPIO) interface
State configurable timer (SCTimer/PWM) subsystem on AHB
Global input multiplexer array (GIMA)
Quad SPI flash interface (SPIFI)
10/100T Ethernet MAC with RMII and MII interfaces and DMA support
High-speed USB 2.0 Host/Device/OTG & high speed USB 2.0 Host/Device interface
External memory controller (EMC)
LCD controller with DMA support
Secure digital Input/output (SD/MMC) card interface
Four general-purpose timer/counters with capture and match capabilities

Applications:
Motor Drive & Control, Power Management, Logistics, RF Communications, Embedded Design & Development, Industrial, Automation & Process Control, Metering

What’s in the box
1 x Nxp (2094314) Microcontroller