300Mbps Outdoor Wi-Fi Range Extender 2x11dBi Antenna

Outdoor Point to Point Wireless Bridge: It supports up to 64 devices and provides 300Mbps high speed with 100M Ethernet port and 2×2 MIMO antenna. Point to Point/Multi-Point connection (1-4) can be used for elevator monitor/surveillance networks. Simple settings can achieve wireless optimization, and improve the quality and effectiveness of link transmission.
High gain antenna panel with 2 built-in 11dBi directional MIMO antennas, is designed to directionally strengthen the WiFi signal and make it more focused. Also the WiFi coverage in a specific direction is farther than omnidirectional antennas.
Maximum 1.5km long range wireless data transmission (tested in paired PtP or PtMP transmission, barrier-free environment). Specially designed for outdoor use, ideal for extend WiFi network video surveillance range for barn, shop, garage, warehouse, factory, community, street. Please make sure there are no obvious obstacle around it, or this may affect the distance.

1.Extended Wi-Fi coverage: high-power Wi-Fi APs/repeaters can receive existing 2.4GHz wireless signals and repeat them, extending your Wi-Fi network range to areas that routers or access points cannot reach
2.Enhanced wireless performance: 2x11dBi external directional antenna, providing better wireless performance, transmission rate, and stability
3.Flexible deployment options: The weatherproof RJ45 connector integrates passive Ethernet power supply (PoE) support, ensuring that the device is not affected by various weather conditions and can be easily deployed to different environments. Passive PoE support enables flexible deployment, allowing you to place your devices where you need them without worrying about power sockets or cables.
4.Durable and weather-resistant design: Built-in lightning arrester (15kV ESD) to protect equipment from damage caused by lightning strikes. Its sturdy and weatherproof casing is designed to withstand harsh outdoor conditions, ensuring reliable use in any weather.
5.Multiple operating modes: AP, repeater, WISP mode, and other operating modes. In AP mode, it also provides client and client+relay modes, allowing you to customize wireless solutions according to specific requirements
6.Supports passive PoE power supply (via network cable), with a power supply distance of no more than 80 meters
7.Complies with IEEE 802.11b/g/n standard, with wireless speeds up to 300mbps
8.Supports 128-bit WPA/WPA2 (TKIP/AES)
9.With 6 status LED indicators

Specification:
1.Port: 1 x WAN/LAN
2.Key: 1 x reset
3.LED: 1 x Power supply, 1 x Wan/LAN, 1 x WiFi, 3 x Signal
4.Power supply method: DC24V/0.5A Ethernet power supply (passive PoE)
5.Product size: 180mm x 50mm x 50mm (length x wide x High)
6.Speed/frequency band: 300Mbps 2.4GHz
7.Antenna: 2x11dbi directional antenna
8.Wireless security: WPA-PSK/WPA2-PSK encryption
9.Function description: time setting, DDNS, static router, DHCP server, wireless settings

What’s in the box
1x 11DBI antenna
1 x Wi-Fi AP/Router
1 x RJ-45 Networking Cable
1 x Power Adapter
1 x POE Converter
1 x Main body holder
2 x Cable ties 1 x Screw fittings
1 x Quick Installation Guide