Ubiquiti PowerBeam AC Gen2 5Ghz

Ubiquiti Networks airMAX PowerBeam AC 5 GHz Gen2 High-Performance Bridge

Key Features
Dedicated Wi-Fi Radio for Management
5 GHz Frequency
25 dBi Gain
1 x Gigabit Ethernet Network Interface
MIPS 74Kc Processor
Power, Ethernet, Signal Strength LEDs
Outdoor UV Stabilized Plastic Antenna
125 mph Wind Loading / Survivability
±24kV ESD/EMP Protection
Includes Pole-Mounting Kit

Ubiquiti Networks PowerBeam AC Gen2 Overview
With tighter beamwidth and a dedicated Wi-Fi radio for management, the airMAX PowerBeam AC 5 GHz Gen2 High-Performance Bridge from Ubiquiti Networks offers a more reliable long-distance point-to-point connection. This radio is designed to filter out noise to reduce interference in areas congested with multiple RF signals at a maximum data transfer rate of over 450 Mb/s. Setup is simple thanks to fully adjustable hardware designed to make it easy to adjust the mounting bracket ±20° along with the ability to detach the antenna feed with the push of a button.

Improved Noise Immunity
The PowerBeam 5AC Gen2 directs RF energy in a tighter beamwidth. With the focus in one direction, the PowerBeam 5AC Gen2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals at the same or similar frequencies.
Integrated Design
Ubiquiti’s InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Featuring a high-performance and innovative mechanical design, the PowerBeam AC Gen2 is versatile and cost-effective to deploy.
Software
Powerful Wireless Features
Access Point PtMP airMAX Mixed Mode
airMAX ac Protocol Support
Long-Range Point-to-Point (PtP) Link Mode
Selectable Channel Width
PtP: 10/20/30/40/50/60/80 MHz
PtMP: 10/20/30/40 MHz
Automatic Channel Selection
Transmit Power Control: Automatic/Manual
Automatic Distance Selection (ACK Timing)
Strongest WPA2 Security
Usability Enhancements
airMagic Channel Selection Tool
Redesigned User Interface
Dynamic Configuration Changes
Instant Input Validation
HTML5 Technology
Optimization for Mobile Devices
Detailed Device Statistics
Comprehensive Array of Diagnostic Tools, including RF Diagnostics and airView Spectrum Analyzer

Advanced RF Analytics
airMAX ac devices feature a multi-radio architecture to power an RF analytics engine. An independent processor on the PCBA powers a second, dedicated radio, which persistently analyzes the full 5 GHz spectrum and every received symbol to provide you with advanced RF analytics.

Real-Time Reporting
airOS 8 displays the following RF information:
Persistent RF Error Vector Magnitude (EVM) constellation diagrams
Signal, Noise, and Interference (SNI) diagrams
Carrier to Interference-plus-Noise Ratio (CINR) histograms

Spectral Analysis
airView allows you to identify noise signatures and plan your networks to minimize noise interference. airView performs the following functions:
Constantly monitors environmental noise
Collects energy data points in real-time spectral views
Helps optimize channel selection, network design, and wireless performance

In airView, there are three spectral views, each of which represents different data: waveform, waterfall, and ambient noise level. airView provides powerful spectrum analyzer functionality, eliminating the need to rent or purchase additional equipment for conducting site surveys.
UMobile App
Accessing airOS via Wi-Fi
The UMobile App provides instant access to the airOS configuration interface and can be downloaded from the App Store (iOS) or Google Play (Android). UMobile allows you to set up, configure, and manage the PowerBeam 5AC Gen2. It offers the following options once you’re connected or logged in to the device:

Check link status information or the basic configuration settings of the PowerBeam 5AC Gen2
Change or update the existing configuration of the PowerBeam 5AC Gen2
Access tools for initial installation and configuration of the PowerBeam 5AC Gen2
Back up or update the configuration, upload new firmware, reboot the device, reset the device to factory defaults, access the airOS UI in the web browser, or disconnect from the PowerBeam 5AC Gen2

Hardware
Full Adjustment Flexibility
The PowerBeam 5AC Gen2 features a two-mount system that provides adjustment flexibility along both axes for versatile mounting options. The mounting system, coupled with the built-in bubble level, enables quick and easy alignment.

Improved Mounting and Surge Protection
Featuring enhanced protection against power surges, the PowerBeam 5AC Gen2 offers a more robust mount with separate azimuth and elevation adjustments.

Ubiquiti Networks PowerBeam AC Gen2 Specs
Wireless
Wireless Frequency Bands: 5 GHz
MU-MIMO Support: Yes
WLAN Mode: Wi-Fi 5 (802.11ac)
Antenna Gain: 25 dBi
Bluetooth: None

Interface
Ports: 1 x 10/100/1000 Mb/s Gigabit Ethernet (RJ45) PoE

Management
Throughput:450 Mb/s Total

Hardware
RAM: 64 MB
Processor: MIPS 74Kc

Electrical
DC Input Power: 22 to 26 VDC at 0.5 A
Power Consumption: 8.5 W

Environmental
Operating Temperature: -40 to 158°F / -40 to 70°C
Operating Humidity: 5 to 95%

General
Certifications: CE, FCC, IC, RoHS, as per Manufacturer
Mount Options: Pole
Dimensions: 16.54 x 16.54 x 9.06″ / 420 x 420 x 230 mm
Weight: 4.89 lb / 2.22 kg

What’s in the box
Ubiquiti Networks airMAX PowerBeam AC 5 GHz Gen2 High-Performance Bridge
Dish Reflector
Antenna Feed
Rear Housing
Adjustment Bracket
Mounting Bracket
4 x Hex Bolts with Washers
Pole Clamp
2 x Long Carriage Bolts
2 x Flange Nuts
Gigabit PoE (24 V, 0.5 A) with Mounting Bracket
Power Cord
Limited 1-Year Warranty