Microchip (RN171XVW-I/RM) Wireless LAN Module, 802.11 b/g

Wireless LAN Module, 802.11 b/g, On-board TCP/IP Stack, Wire Antenna

Product Overview
RN171XVW-I/RM module is a certified WiFi solution especially designed for designers who want to migrate their existing 802.15.4 architecture to a more standard TCP/IP based platform without redesigning their existing hardware. The RN-171-XV module is based on Roving Networks’ robust RN-171 WiFi module and incorporates an 802.11 b/g radio, a 32bit SPARC processor, a TCP/IP stack, a real time clock, a crypto accelerator, power management unit, and an analog sensor interface. The module offers additional functionality through its onboard programmable GPIO pins (10) and ADCs (8). The ADCs provide 14bit resolution while the GPIOs can be configured to provide standard functionality or status signalling to a host microcontroller, reducing the need for serial polling between the WiFi module and host microcontroller. The module is pre-loaded with firmware to simplify integration and minimize applications development time.

Standard configuration industrial temp, WiFi 802.15.4 replacement solution with 1/4inch wire antenna
On board TCP/IP stack provides internet access to every node
Ultra low power
Configurable transmit power 0dBm to +12dBm
TTL UART hardware interface
Data rate of 464Kbps using hardware flow control
Through hole board simplifies system integration
Complete TCP/IP networking stack
WiFi Alliance certified for WEP, WPA, and WPA2-PSK
WPS mode for easy configuration

Applications:
Wireless, Metering, Industrial, Sensing & Instrumentation, Robotics, Communications & Networking

Product Information:
Frequency RF: 2.48MHz
Module Interface: UART
Module Applications: Wireless Connectivity
Product Range: –

What’s in the box
1 x Wireless LAN Module