HyperX Gaming RAM- GB MEMORY-8GB DDR-4-3600MHz, 266pin, 64bit, DUAL RANK

HyperX HX436C17FB3A/8 is a 1G x 64-bit (8GB) DDR4-3600 CL17
SDRAM (Synchronous DRAM) 1Rx8, memory module, based on
eight 1G x 8-bit FBGA components per module. Each module kit
supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Each
module has been tested to run at DDR4-3600 at a low latency timing
of 17-21-21 at 1.35V. The SPDs are programmed to JEDEC
standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each
288-pin DIMM uses gold contact fingers. The JEDEC standard
electrical and mechanical specifications are as follows:
CL(IDD)
Row Cycle Time (tRCmin)
Refresh to Active/Refresh
Command Time (tRFCmin)
Row Active Time (tRASmin)
UL Rating
Operating Temperature
Storage Temperature
17 cycles
45.75ns(min.)
350ns(min.)
32ns(min.)
94 V – 0
0o
C to +70o
C
-40o
C to +85o
C
Factory Timing Parameters
– Default (JEDEC): DDR4-2400 CL17-17-17 @1.2V
– XMP Profile #1: DDR4-3600 CL17-21-21 @1.35V
– XMP Profile #2: DDR4-3000 CL15-17-17 @1.35V
– Power Supply: VDD = 1.2V Typical
– VDDQ = 1.2V Typical
– VPP = 2.5V Typical
– VDDSPD = 2.2V to 3.6V
– On-Die termination (ODT)
– 16 internal banks; 4 groups of 4 banks each
– Bi-Directional Differential Data Strobe
– 8 bit pre-fetch
– Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
– Height 1.624” (41.24mm), w/heatsink

What’s in the box
1 x Ram