200W Eco Flood Light

Features:
– 200W extra bright LED s producing 4000 lumens of light
– High quality Die Cast Aluminum body with protective anti-rust coating and Tempered Glass
– Easy to install onto wall or pole, fully waterproof, dustproof and durable
– Strong infrared remote control with up to 15m operating distance
– Fully automatic day/night operation with ability to set operating length as desired
– Charge time is between 6-8 hours in direct sunlight
– Has a Battery Level Indicator
– Has a remote Control
– This super bright flood light uses only solar energy to provide continuous lighting all night.
– The solar panel automatically recharges the light during the day with no additional electrical connection needed.
– High quality, waterproof design with built in lithium battery capable of more than > 2,000 life cycles (5 years).
– Ideal for Residential Homes, Roadways, Parking Areas, Recreational Parks, Factories etc. Energy-saving and friendly to the environment.
– Protection Grade: IP67 (even though it is an IP67 water resistant, if water does get in, can be
opened to let it dry)

Specifications:
– Power: 200W
– LED: 400pcs/ Max 4000 LM
– 120 beam angle
– Color temperature: 6500K (Cool white)
– Battery capacity: 3.2V, 32500mAH LiFePO4
– Solar panel: 6V 40W
– Charging time: 6 – 8 hours (Direct sunlight)
– Operating time: 15hrs-18Hrs + on full charge
– Waterproof level: IP67
– Control mode: Light sensor and Remote control
– Remote control distance: 15m
– Material: Die Cast Aluminum, Tempered Glass
– Working temperature -25 C to 60 C
– Panel size: Height-71cm x Length-37cm x Width-3cm Weight(2.75kg)
– Flood light size: Height-26.5cm x Length-29.5cm x Width-10cm(2.75kg)

Info:
– If the meter on the left bottom is 50%, it is preferable to let it charge to full recovery.
– If it is between 50 and 100 percent, one can use the light, but better to charge to full recovery.
– If it is on a 100 % it means fully charged.
– One can adjust the brightness gradually from low brightness to high brightness with the remote.
– If you press memory “M” it will come onto that brightness every time it comes on by itself.
– One can also program it to come on for only 3hr, 5hr or 8 hours.
– It will come on for only 3 hours, every night as required if you press “M”
-Should you wish to revert to normal press auto, and it will go back to normal working mode, which means it will come on automatically if the sun goes down and it will go off when the sun comes up automatically.

Instructions:
– Install the light on the wall or any vertical surface.
– Place the panel north facing (20-45 degrees) on a sunny surface.
– Connect the solar panel to your light, tighten the waterproof connection.
– Press the Auto button on the remote (facing to the light) to set the on/off function, you can also set the brightness, and hours 3hrs, 6hrs and 8hrs.
– To check if its working before installation, connect the panel to the light tightly, put the panel in the sun, One of the 5 lights should start flashing, which means its charging and working correctly

What’s in the box
1 x 200W Eco Flood Light