Pipercross C602D Air Filter For Twin Carburettors And Throttle Bodies

Pipercross

The C602D range of filters is developed for twin carburettor or throttle body applications. They are used throughout Motorsport and are supplied as an OE item to the likes of Westfield, Jenvey etc.

The range consists of a filter unit which utilises the Pipercross competition foam, bonded to a ring plate. The filter is a lifetime filter and can be washed and reused, it is a simple process using one of our cleaning kits. This ring plate can be attached (using the supplied DZUS fasteners) to either a tailored base plate or a blank base plate so you can cut the holes to suit your application.

To choose the correct filter for your engine please select the height as per your requirements, it is always best to choose the largest possible filter to get the maximum airflow. Remember to leave at least 20mm between the end of the trumpet/carburettor inlet and the inside of the filter.

The length (435mm) and the width (65mm inc tabs) of the filter remain the same
Features:

Varied filter heights to suit your application
Suitable for twin side draught carburettors or throttle bodies
Lifetime filter – can be washed and reused
Filter Size – 435mm x 65mm

Note – these filters require the use of a suitable backplate.”

What’s in the box
1 x Pipercross Air Filter