Filter

MAC AFRIC 10 litre Green Metal Jerry Can 0.8 mm

$32.20

Category: Garage Equipment

Anyone who needs to transport gasoline, diesel, or any other fuel should opt for our 10 liter Green Metal Jerry Can. It has a strong construction that’s made to last even in the worst conditions and is made of premium metal. The can has a vivid green finish that not only enhances its visual attractiveness but also makes it simple to identify in any setting. It also has a tight-fitting cap that guarantees that your fuel will be safe and uncontaminated during transit. The can’s 10-liter capacity offers enough storage space for all of your fuel needs, while its small size and strong handle make it easy to carry. *spout is sold seperately and not included image is for illustrative purpose only

Attribute Label	Value
Capacity	10 L
Colour	Green
Nozzle Size	35 x 45 MM
Package Height (cm)	25.20
Package Length (cm)	35.80
Specifications Description	#html-body [data-pb-style=ELOJDP4]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll} How to store fuel at home? The Health and Safety Executive says you can legally store 30 litres of petrol at your home but there are strict guidelines about how and where you should put it, because fuel is highly flammable. These laws ruling petrol date back to 1929. It must be kept in … A) A Shed B) A Garage C) Outside no more than six metres from your house – ie, at the end of a driveway. Proper Care for Metal Jerry Cans Metal Jerry Cans should be stored in well ventilated, dry areas out of direct sunlight. The seal on a Jerry Can lid and Jerry Can Pourer are consumable parts and should be inspected regularly and replaced when signs of wear or cracking appear. The Powder Coated outer lining can be scratched or scuffed from contact with hard surfaces and should be cleaned off and touched up when found to prevent the steel underneath from exposure and eventually corrosion from forming. Severe dents caused by excessive impact can damage the inner enamel lining with splits allowing the exposure of the steel inside the can. While the steel wall of the can will remain intact, the inner lining separation may lead to corrosion build up over time and replacement of the Jerry Can is recommended. The tines should be lubricated with small amounts of grease to minimise contact with the winglets causing the removal of powder coat. This will also reduce the resistance from pressure when opening and closing the lid.