Makita Circular Saw 5704RK

Name: Makita Circular Saw 5704RK
SKU: 4172351
Availability: InStock

$391.53

Category: Power Tools

Low noise and vibration sawing for increased operator comfort.All ball bearing construction for extended service life.

Attribute Label	Value
Blade Bore	22 MM
Blade Diameter	190 MM
Blade Teeth Count	80 Teeth
Cable Length	3 M
Frequency	50 HZ
Handle Side	Left
Max Cutting Capacity At 45Â°	46 MM
Max Cutting Capacity At 90Â°	66 MM
No Load Speed	4 900 RPM
PDP Expert Advice	Setting the blade too deep causes a few problems. First, itâs more dangerous than a correctly set blade because more blade is exposed while cutting.
Package Height (cm)	28.45
Package Length (cm)	42.93
Power Output	1 200 W
Sound Level	NA
Specifications Description	#html-body [data-pb-style=TMKQ18U]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll} What should you avoid when cutting with a circular saw? Do not hold or force the retracting lower guard in the open position. Do not place hand under the shoe or guard of the saw. Do not over tighten the blade-locking nut. Do not twist the saw to change, cut or check alignment. Do not use a saw that vibrates or appears unsafe in any way. Do not force the saw during cutting. Do not cut materials without first checking for obstructions or other objects such as nails and screws. Do not carry the saw with a finger on the trigger switch. Do not overreach. Keep proper footing and balance. Do not rip stock without using a wedge or guide clamped or nailed to the stock.
Switch Position	Handle Trigger
Types of Adjustments	Cutting Angle and Speed Adjustments