Red indicator light

Equipped with a red indicator light to check if the remote control is working correctly. 3 channels; each button can control one door independently.

Compatible Models

Compatible with Chamberlain, Liftmaster, and Motorlift remote controls:

94334CE, 9747E, 94330EWK, 84330E, 84333E, 84335E, 8747E, 84330EML, 84333EML, 84335EML, 8747EML, 94330E, 94333E, 94334E, 94335E, 94330EML, 94333EML, 94334EML, 94335EML, 1A5639-7, 1A5477, 1A6487, 1A5478, 132B2372, D-66793, 94334HD, GC844 CG844, C840, C940, C943, C945, CM842, CM844, CM128

This remote control is compatible with the following garage door openers:

Garage Door Openers: ML500, ML700, ML750, ML850, LM600, LM800, LM1000, RDO, GPD60, HC260ML (HC-260 ML), HC280 (HC-280), HC100ML (HC-100 ML), HC300ML (HC-300 ML), MotorLift HC400ML (HC-300 ML), HC500ML (HC-300 ML), HC600ML (HC-600 ML).

Programming Procedure

1. Press the programming button on your motor. The LED will light up.

2. Press the desired button on the new remote control.

3. The light on the motor will flash to confirm successful programming. To delete all codes from the receiver, press and hold the receiver's learn button until the indicator light goes out (after 6 seconds). All codes learned by the receiver will be deleted.

Specifications

Number of Channels: 3

Code: Rolling Code

Battery: Built-in battery (CR2032 3V button cell)

Frequency: 433.92MHz

Housing Material: Metal and ABS

Launch Distance: 30m-100m (open space)

What's in the box
2 x Keyrings
2 x Garage Door Remote Controls
1 x Instruction Manual