Power Driver, 3 Phase Bridge, 10V-20V Supply, 500mA Out, 425ns Delay, SOIC-28
Product Overview
The IR2130SPBF is a high voltage/high speed power MOSFET and IGBT Driver with three independent high and low side referenced output channels. Proprietary HVIC technology enables ruggedized monolithic construction. Logic inputs are compatible with CMOS or LSTTL outputs, down to 2.5V logic. A ground-referenced operational amplifier provides analog feedback of bridge current via an external current sense resistor. A current trip function which terminates all six outputs is also derived from this resistor. An open drain FAULT signal indicates if an over-current or under-voltage shutdown has occurred. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use at high frequencies. The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which operate up to 600 volts.
Floating channel designed for bootstrap operation
Tolerant to negative transient voltage
dV/dt Immune
Gate drive supply range from 10 to 20V
Under-voltage lockout for all channels
Over-current shutdown turns off all six drivers
Independent half-bridge drivers
Matched propagation delay for all channels
Outputs out of phase with inputs
Cross-conduction prevention logic
Fully operational to +600V
2.5V Logic compatible
Applications
Consumer Electronics, Industrial
Product Information
No. of Channels: 6Channels
Driver Configuration: 3 Phase Bridge
Power Switch Type: MOSFET
Supply Voltage Min: 10V
Supply Voltage Max: 20V
Driver Case Style: SOIC
Input Type: Inverting
IC Case / Package: SOIC
No. of Pins: 28Pins
Source Current: 250mA
Input Delay: 675ns
Output Delay: 425ns
Sink Current: 500mA
Operating Temperature Min: -40°C
Operating Temperature Max: 125°C
What's in the box
1 x Power Driver
