Power Load Switch, Electrically Isolated, 8 Bit, High Side, Active Low, 8 Outputs, 5.5V, TSSOP-48
Product Overview
The ISO1I811T is an electrically isolated 8 bit Data Input Interface used to detect the signal states of eight independent input lines according to IEC61131-2 Type 1/2/3 (e.g. two-wire proximity switches) with a common ground (GNDFI). For operation in accordance with IEC61131-2, it is necessary for the ISO1I811T to be wired with resistors according to the application diagram. The 8 bit parallel/serial µC compatible interface allows the IC to directly connect to a µC system. The µC interface also supports a direct control mode and is designed to operate with 3.3/5V CMOS compatible levels. The data transfer and isolation from input to output side is realized by the integrated Coreless Transformer Technology.
Robust over operational lifetime
Secure data transfer under very harsh conditions
Complete system integration
8-channel input according to IEC61131-2 (Type 1/2/3)
Integrated galvanic isolation 500VAC (EN60664-1, UL1577)
Adjustable deglitching filters
Up to 125kHz sampling frequency
Applications
Motor Drive & Control, Industrial, Power Management
Product Information
Power Load Switch Type: High Side
Input Voltage: 5.5V
Distribution Switch Case Style: TSSOP
No. of Pins: 48Pins
Thermal Protection: No
On / Enable Input Polarity: Active Low
No. of Outputs: 8Outputs
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C
What's in the box
1 x Power Load Switch
