Dual MOSFET IC, Low Side, 4.5V-18V Supply, 1.5A Out, 30ns Delay, DIP-8
Product Overview
The TC4427AEPA is a 1.5A dual non-inverting high-speed Power MOSFET Driver for pulse transformer drive. The TC4427A device has matched leading and falling edge propagation delay times. The device is highly latch-up resistant under any conditions within their power and voltage ratings. It is not subject to damage when up to 5V of noise spiking (of either polarity) occurs on the ground pin. It can accept, without damage or logic upset, up to 500mA of reverse current (of either polarity) being forced back into their outputs. All terminals are fully protected against Electrostatic Discharge (ESD) up to 2kV. The TC4427A MOSFET driver can easily charge/discharge 1000pF gate capacitances in under 30ns. This device provides low enough impedances in both the on and off states to ensure the MOSFET's intended state will not be affected, even by large transients.
Matched rise, fall and delay times
7R Low output impedance (typical)
Input withstands negative inputs up to 5V
2kV Electrostatic Discharge (ESD) protected
Applications
Power Management, Signal Processing, Automotive
Product Information
No. of Channels: 2Channels
Driver Configuration: Low Side
Power Switch Type: MOSFET
Supply Voltage Min: 4.5V
Supply Voltage Max: 18V
Driver Case Style: DIP
Input Type: Non-Inverting
IC Case / Package: DIP
No. of Pins: 8Pins
IC Mounting: Through Hole
Source Current: 1.5A
Input Delay: 30ns
Output Delay: 30ns
Sink Current: 1.5A
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C
Qualification: AEC-Q100
What's in the box
1 x Dual MOSFET IC
