12Vdc 800L/hr 5m Pump + 20W 12V Solar Polycrystalline Panel Combo

PLEASE NOTE !!!! 

Before buying this product, the supplied pumps are small (see dims). They fit into the palm of your hand. Brushless DC pumps are very efficient and hence small in size.

This pump is spec’d to deliver 800lph and can pump up to a head of 5m even though it’s so small. The pump/s is/are packaged inside the bubble wrapped panel.

Some customers return the product only thinking the pump looks to small, but it’s been tested and it does perform to spec, provided the 20W of power is supplied.

In this combo 1 x 20W DC pump is supplied with 1 x 20W PV Panel

We have combined two great products into one purchase!

One 12V DC 800L/hr 5m Pump and one 20W Solar Polycrystalline Panel. 

This unit will run wherever there is sunshine, and it can be easily connected without electricity. With these products you can pump water for various uses without the use of electricity. The 20W solar panel provides the power needed to power the 12V DC 800L/hr 5m pump so no electricity is required to run your water features during sunny periods.

This system will run at full power when it is not cloudy and there is full sun exposure. The energy output supplied to the pump slows down depending on the angle and the intensity of the sun.

PLEASE NOTE: 

– You are only able to run one pump using this 20W solar panel.

– This combo does not come with the wire that connects the pump to the solar panel. You will need to provide your own flex for the connection. Any standard low current flex wire (red/black) will do.

Panel Specifications:

– Peak Power (Pmax, W p) – 20W.

– Open Circuit Voltage (Voe) – 21.51V.

– Short Circuit Current (lsc) – 1.43A.

– Voltage at Maximum Power (Vmp) – 17.54V

– Current at Maximum Power (Imp) – 1.33A.

– Module Efficiency – 10.33%.

– Module Dimensions – 460mm x 340mm x 24mm.

– Matrix – 9 x 4.

– Solar Cell Type – Multi crystalline cells.

– Front Cover – 3.2mm thick low iron tempered glass.

– Frame Material – Silver Anodized Aluminium Alloy.

– Junction Box – 2 Rail.

Pump Specifications:

– Material: Engineering plastic

– Water temperature: 0-60 degrees Celsius hot water pump / cool water pump

– Voltage: DC 12V

– Flow channel characteristic: One side in, one side out

– Current (+/- 15%): 920 mA

– Power (+/- 15%): 19 W

– Flow (+/- 15%): 800 L/hr

– Lift: 5m, when powered with 20W

– Suction calibre: 16 mm

– Output calibre: 12 mm

– Noise: Less than or equal to 35 dB

– Weight: 240 g

– Dimensions: 78 mm x 50 mm x 60 mm

– Wire length: Approximately 30cm (Open ended red (+) & black (-)