Allegro Microsystems (ACS758LCB-100U-PFF-T) Current Sensor, 10 mA

Current Sensor, Current Conductor, 10 mA, 120 kHz, PFF, 5 Pins, 3 V, 5.5 V

Product Overview
The ACS758LCB-100U-PFF-T is a thermally enhanced, fully integrated, hall effect based linear current sensor IC in 5 pin CB package with PFF lead form. It provides economical and precise solutions for AC or DC current sensing. It consists of precision, low offset linear hall circuit with copper conduction path located near die. The current flowing through this copper conduction path generates a magnetic field which hall IC converts into a proportional voltage. Device accuracy is optimized through close proximity of magnetic signal to hall transducer. A precise and proportional output voltage is provided by low offset, chopper stabilized BiCMOS hall IC which is programmed for accuracy at factory. High level immunity to current conductor dV/dt and stray electric fields offered by Allegro proprietary integrated shield technology provides low output voltage ripple and low offset drift in high side and high voltage applications. This device is CB, UL E316429, CE and TUV approved.

Primary sampled current (Ip) of 100A
Sensitivity is 40mV/A
Current directionality is unidirectional
Automotive grade AEC Q-100 qualified
Ultra low power loss, 100µohm internal conductor resistance
Single supply operation from 3V to 5.5V
120KHz typical bandwidth
3µs output rise time in response to step input current
Output voltage proportional to AC or DC currents
Operating temperature range from -40°C to 85°C

Applications
Sensing & Instrumentation, Motor Drive & Control, Power Management, Automotive

Product Information

Quiescent Current: 10mA
Bandwidth: 120kHz
Sensor Case Style: PFF
No. of Pins: 5Pins
Supply Voltage Min: 3V
Supply Voltage Max: 5.5V
Operating Temperature Min: -40°C
Operating Temperature Max: 150°C

What’s in the box
1 x Current Sensor