Analog Devices (MAX713CSE+) Battery Charger for 16 Cells of NiCd,

Battery Charger for 16 Cells of NiCd, NiMH battery, 5.5V input, 17V / 2A charge, SOIC-16

Product Overview
The MAX713CSE+ is a NiCd/NiMH battery Fast-charge Controller. The MAX713 fast-charge nickel metal hydride (NiMH) and nickel cadmium (NiCd) batteries from a DC source at least 1.5V higher than the maximum battery voltage. 1 to 16 series cells can be charged at rates up to 4C. A voltage-slope detecting analogue-to-digital converter, timer and temperature window comparator determine charge completion. The MAX713 is powered by the DC source via an on-board +5V shunt regulator. They draw a maximum of 5µA from the battery when not charging. A low-side current-sense resistor allows the battery charge current to be regulated while still supplying power to the battery’s load.

Fast-charge NiMH or NiCd batteries
Voltage slope, temperature and timer fast-charge cut-off
Charge 1 to 16 series cells
Supply battery’s load while charging (linear mode)
Fast charge from C/4 to 4C rate
C/16 Trickle-charge rate
Automatically switch from fast to trickle charge
Linear mode power control
5µA Maximum drain on battery when not charging
5V Shunt regulator powers external logic

Applications
Computers & Computer Peripherals, Consumer Electronics, Portable Devices

Product Information
Battery Type: NiCd, NiMH
Input Voltage: 5.5V
Battery Charge Voltage: 17V
Charge Current Max: 2A
Battery IC Case Style: SOIC
No. of Pins: 16Pins
No. of Series Cells: 16
Operating Temperature Min: 0°C
Operating Temperature Max: 70°C
MSL: MSL 1 – Unlimited

What’s in the box
1 x Battery Charger