Features
-Battery-protected and surge-only outlets – Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
-LED status display – Quickly understand unit and power status with visual indicators.
-Audible alarms – Provides notification of changing utility power and UPS power conditions
-Intelligent battery management – Maximizes battery performance, life, and reliability through intelligent, precision charging.
-Battery failure notification – Provides early-warning fault analysis on batteries enabling timely preventive maintenance
-Automatic self-test – Periodic battery self-test ensures early detection of a battery that needs to be replaced.
-Safety-agency approved – Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
-Battery and surge protected outlets – Back up and protect your hardware and data during power outages, surges and spikes.
-Surge only outlets – Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage
Specifications
Output
-Max Configurable Power: 410 Watts / 750VA
-Output Frequency (sync to mains): 50/60 Hz +/- 1 Hz Sync to mains
-Topology: Line interactive
-Waveform type: Stepped approximation to a sinewave
-Transfer Time: 6 ms typical, 10 ms maximum
Input
-Input frequency: 50/60 Hz +/- 5 Hz Auto-sensing
-Input voltage range for main operations: 140 – 300V
-Number of Power Cords: 1
-Input Power Factor at Full Load: 0.63
Batteries & Runtime
-Battery type: Lead-acid battery
-Typical recharge time: 8hour(s)
-Expected Battery Life: 1 year
Communications & Management
-Interface Port(s): USB
-Control panel: LED Status display with on line : on battery
-Alarm when on battery, Distinctive low battery alarm
Surge Protection and Filtering
-Surge energy rating: 273Joules
-Data Line Protection: RJ45 10/100/1000 Base-T Ethernet protection
Multi Plug
-1x16A 1x5A 0.5m IEC Cord
NB: A UPS is not designed to provide continuous power, merely a window period of minutes that allows a computer or other user to finalize the work at hand and shut down safely. It’s ability to do this is dependent on the number of devices connected to the UPS. Any use of a UPS unit for powering devices outside of normal office equipment can and will void your warranty.
To establish what you can and cannot connect, calculate the total wattage you need to supply and ensure that the UPS you purchase meets that requirement.
Take care not to let the UPS batteries run down completely to 0% – this can damage the batteries AND VOID THE WARRANTY. Use the UPS software to control and manage the unit properly.
Backup times are approximate and may vary with equipment, configuration, battery age, temperature, etc.
What’s in the box
1 x UPS
1 x Power Cord
1 x Multi Plug IEC Cord
1 x User manual
Reviews
There are no reviews yet.