Carely Anti-Fog Shower Mirror with Suction, Razor Holder & Swivel

Our anti-fog mirror has been designed for use in the shower and has a handy razor holder, suction cup and swivel. The shower mirror can be installed on the following surfaces:

Glass

On a window or shower pane. If placing it on a window make sure it's not in direct sunlight.

Mirrors

Will stick to all mirrors.

Flat stone

Marble and quartz are ideal, the smoother the stone the better.

Tiles

The tile must be larger than the suction cup in order for the mirror to stick.

Step 1: Clean the surface

Make sure to thoroughly clean the surface to remove any dirt. After cleaning, dry the surface with a towel.

Step 2: Put in place

Lightly wet the bottom of the suction cup to create a good seal. Make sure the suction is set to the unlocked position. Then, put it in the desired location. The suction cup might not stick right away so keep constant pressure on it until the next step.

Step 3: Lock suction cup

While applying pressure, lock the suction cup in place by rotating the white ring around the base clockwise. If the mirror does not stick then try again after carefully cleaning the surface and applying more pressure when locking. Over time the suction cup will slowly let air back in, give it a good push every once in a while to keep it in place.

If the mirror does not stick to any surface you have tried, there is a sticker included in the box to assist. Apply this to the desired surface, then try to stick the mirror on top of it.

Removing the mirror

Simply untwist the lock by rotating the white ring counter-clockwise. The suction cup should fall off by itself. However, if it doesn't, then simply pull it off by pulling on the small tab on the top.

What’s in the box
1 x Carely Anti-Fog Mirror
1 x Sticker for slippery surfaces