EZVIZ T1C PIR Motion Sensor for A3 Gateway

Key Features
– Wide-Angle Detection
– Adjustable 360°
– Human Motion Detection
– Anti-Tamper Alarm
– Peel-and-Stick Installation
– Instant Alerts via EZVIZ App
– Energy-Saving Design with Long Battery Life (Up to 2 Years)
– Smart Integration with EZVIZ Cameras

360° Adjustable
– Install the PIR sensor anywhere you need protection and rotate it a full 360 degrees to find the best detection angle. You can also fine-tune its detection coverage using the pet shield to partially cover the sensor, so it only alerts about human activities, rather than every time your pet runs through the room.

Works with EZVIZ Cameras for Video Storage
– Connect your sensor to the Home Gateway A3 and link it with your EZVIZ Security Cameras for enhanced protection – all via the EZVIZ App. If you use a local storage card or have subscribed to EZVIZ CloudPlay, the camera can begin auto-recording for 5 seconds whenever the sensor detects an activity.

Up to 2 Years of Battery Power
– The peel-and-stick installation makes it easy for you to find the best setup for your home. The included battery in the sensor can provide up to 2 years of power when the energy-saving mode is enabled.
Anti-tamper alarm: For extra peace-of-mind, the sensor alerts you immediately when anyone forcibly removes its cover.

Anti-tamper alarm for added protection
– For extra peace-of-mind, the sensor alerts you immediately when anyone forcibly removes its cover.

Works with A3 Gateway
– the PIR sensor T1C can’t work independently, it requires the EZVIZ Home Gateway A3 to work properly. It can be conveniently added to your EZVIZ alarm system for expanded protection. You will be notified of any detected activity, all through the EZVIZ App.

Specifications
– Model CS-T1C-A0-BG
General
– Operation Conditions -10 °C to 55 °C (14 °F to 131 °F), humidity 95% or less (non-condensing)
– Dimensions Main body: ? 43.5 × 32.0 mm (1.7 × 1.3 inch) Base: ? 29.0 × 9.5 mm (1.1 × 0.4 inch)
– Package Size 92 × 52 × 93 mm (3.6 × 2.0 × 3.7 inch)
– Weight 92 g (3.2 oz) with package
Detection
– Detection Type Passive infrared (PIR)
– Detection Distance Up to 7 m / 23 ft
– Detection Angle 90° horizontal, 90° vertical
– Recommended Installation Height 1.8 to 2.5 m for wall-mounted installation
– Pet-Proof Detection Requires using the pet shield and an installation height of 50 cm or higher above the pet
Function
– Low Battery Reminder Supports
– Anti-Tamper Alarm Supports
– Installation Methods Adhesive back with magnetic parts. Supports wall and ceiling flip-over installation
Battery
– Battery Type Cell battery CR2450
– Battery Life High-performance mode: Up to 1 year Energy-saving mode: Up to 2 years
Network
– Protocol ZigBee 3.0
– Communication Distance < 200 m (Tested in open environment)

What’s in the box
– T1C PIR Sensor
– Pet Shield
– Doubled-sided Tape
– Regulatory Information
– Quick Start Guide