Ftdi (CHIPI-X10) Cable, USB – DB9 Male RS232, Chipi-X Series, 100mm

Product Information
Conversion Type: USB to RS232 Converter
Baud Rate: 250Kbaud
Converter Connector Type: D Sub 9 Position Plug
Chip Type: FT231XS
Cable Length – Metric: 100mm
Cable Length – Imperial: 4″
Product Range: Chipi-X

Product Overview
The CHIPI-X10 is a USB to RS232 level full handshake UART cable with FT231X USB to full handshake UART IC and FT3243S RS232 transceiver IC. It utilises the minimum number of components required for a basic USB to RS232 converter designed using the FT231XS chip combined with an RS232 level converter and a few capacitors. Chipi-X10 is CE and FCC approved and is one of the simplest USB to RS232 solutions around. Using a standard DB9 connector and powered from the USB port, the Chipi-X10 converter can be used with VCP drivers to provide a COM port on a PC which is capable of communication rates with RS232 devices, from 300Baud up to 250KBaud. This Chipi – X10 is supplied with a sculpted matt white plastic enclosure fitted, which covers the electronics inside. A male DB9 (aka DE9) connector provides the connectivity for RS232 communications and a USB-A plug tethered by a 10cm cable to the PCB provides connectivity for USB communications.

VCP and D2XX drivers eliminate the requirement for USB driver development in most cases
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd/even/mark/ space/no parity
Fully assisted hardware or X on/X off software handshaking
512B receive buffer and 512byte transmit buffer utilising buffer smoothing technology
Adjustable receive buffer timeout
Low operating and USB suspend current
Low USB bandwidth consumption
USB 2.0 full speed compatible
Latch up free
Integrated MTP-ROM for storing USB VID, PID, serial number and product description strings

Applications
Communications & Networking, Audio, Imaging, Video & Vision, Sensing & Instrumentation, Industrial, Consumer Electronics, Wireless, Portable Devices

What’s in the box
1 x USB Cable