Generic Zodiac C250 Electrode/Cell

Only the best quality titanium material is used when producing these electrodes.

Domestic electrodes all come with a 2 year guarantee.

We suggest that prior to installing your new electrode these points are checked:

Loose, corroded connections and exposed wires to the brass terminals generate a large heat (too hot to touch). This amount of heat will burn and melt the plastic end cap on your cell and therefore cause it to leak. If your leads are old, worn or generating heat it is strongly advised that you replace them.

• Avoid corroded leads;
• Avoid burnt end cap;

If in doubt replace the electrode cable.

Please ensure leads and connectors are in good condition and fitted firmly. This type of connector will have a split in the middle so it can be adjusted accordingly to achieve a firm fit.
Please ensure the cell leads are screwed down firmly on the lead in the junction box.
Warranty on your generic replacement electrode/cell will be voided if you do not complete these steps.

After installation of your new cell you must do the following;
?Check for heat transfer
?Check polarity is correct
?Clean the terminals
?Routine checks

If in doubt just give us a call and we can try to assist.
Throughout these listings the use of product names and photos is a descriptive guide only, and in no way intends to infer or suggest that any of the products are the original as produced by any other manufacturer.

What’s in the box
1x Electrode