High Pressure 12Volt Pressure Pump 10L/M Car Washing, Agricultural, Misting

XFL200 High Pressure 12 volt DC Diaphragm Water Pump
Power supply: 12 volt DC
Max Flow – 10 L/min. (2,6GPH)
Max Pressure – 14 bar pressure. (200psi)
Amps – 15 amp version.
Recommended fuse size: 15 amps
Self-priming pumps up to 1,5 metre
Controlled by an auto pressure switch
XFL pump connectors – 1pc 3/4? Male Thread,1pc 1/2” hose barb, 1pc 1/2? hose barb prefilter
Automatic flow controller
XFL series design based on a 5 chamber Diaphragm.
XFL high-pressure pump is perfect for portable car wash machines, carpet cleaning machines, sweepers and agriculture sprayers and patio misting systems and general mobile water transfer. etc
XDP high-pressure diaphragm pump, and can run dry without damaging the motor.

Caution:
Intermittent use only – 40 minutes ON and 20 minutes off. It needs to cool down to ambient temperature.
Frequent start/stop cycling should be avoided
Possible reasons for causing failure – Leaks on the system will cause the pump to cycle, this leads to Pressure Switch failure. Examples: poor connection, Gardena fittings, Ball valve or taps not closing properly.
Low voltages will force these pumps to run continuously and not reach the cut off pressure of 2.4 bar, resulting in pump motor burn-out.

Warning:
High resistance of these pumps will lead to burning out of the brush pump if used continuously.
Pump pressure 160PSi (11 bar) with self-priming ability.
DP High-Pressure wash pumps use Viton seals widely for liquid PH value vary between 4-11PH.

Note:
Because of the high pressure, clamps should be used to secure tubing.
Rubber feet fitted for noise and vibration reduction.
Small, Portable & lightweight.
Mount in a vertical position and use a flexible high-pressure hose.
Shaft made of Stainless steel for heavy-duty pressure.
Beware to avoid kinking pipes.
Not for pumping flammable liquids.

What’s in the box
Pump
Fittings