Ideal-Tek (128.SA) Tweezer, General Purpose, Bent, Flat, Stainless Steel

Product Information:
Tweezer Type: General Purpose
Tweezer Tip Type: Bent, Flat
Overall Length: 105mm
Tip Style: Style 127
Tweezer Body Material: Stainless Steel Body
Tweezer Tip Material: Stainless Steel Tip
Product Range: –

Product Overview:
The 128.SA from Ideal-Tek is an anti-magnetic anti-acid stainless steel general purpose tweezer. This tweezer is handcrafted to have perfect tip symmetry and balance along with polished edges and superior no-scratch/antiglare satin finish. It contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum as additional alloying elements. This tweezer is generally used where corrosion resistance and toughness are primary requirements. It is used by electronic industry, watch makers, jewellers, microscopy, laboratory and medical applications in moderately aggressive chemical environments.

Overall length is 4″ (105mm) and thin, square, bent tips
Low carbon austenitic steel (material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L)
Non-magnetizable
Good corrosion resistance to most chemicals, salts and acids
Annealed state, 8.0g
cm³ density, <=215 hardness HB30, 79 hardness rockwell B
500 to 700Mpa tensile strength (ultimate), 290 tensile strength (yield), <=200Mpa 0.2% yield stress
40% elongation, break and 200Gpa modulus of elasticity
Specific heat capacity is 0.50J
(g·K), thermal conductivity is 15W
(m·K)
Continues use temperature is 350°C and maximum service temperature is 925°C
Resistivity is 0.75 E-4 ohm.cm

What’s in the box
1 x Ideal-Tek (128.SA) Tweezer