iDrive 303 Compatible with Mitsubishi Windbooster Throttle Booster

This system relies on a sensor that measures the pedal pressure and position and sends a signal to the vehicles engine computer which converts to acceleration, you can manipulate the settings to suit your driving. It is an intelligent control unit that dramatically improves throttle response and simultaneously reduces lag. It includes an automatic control function that changes the level of throttle performance based on the pedal pressure. Easily fitted within minutes to any “drive by wire” vehicle with original connectors.

Rather than a traditional accelerator cable, many modern vehicles use ‘fly by wire’ throttle technology. This system relies on a sensor that measures the pedal pressure and position and sends a signal to the vehicle’s engine computer which converts to acceleration.

Many of these fly by wire systems have a noticeable delay. iDRIVE allows you to tune the signal from the accelerator pedal with multiple inbuilt settings to ensure you find a setting that suits your driving style, although there are other products on the market that can offer this performance.

So what makes iDRIVE different?

iDRIVE includes an automatic control function that changes the level of throttle performance based on pedal pressure. So if you are in traffic and accelerating gently the iDRIVE will select setting 1.

If you are accelerating hard to overtake, towing a heavy trailer, or just having fun the iDRIVE will select 9.

The result is the smoothest aftermarket control module on the market.

ECO mode

ECO mode is designed for economy by reducing the accelerator response time. Also handy when you are on the trails and looking for a bit more throttle control when crawling.

Ultimate mode

Ultimate Mode offers 9 sensitivity levels, this allows the driver to tune the controller to the desired level of sensitivity.Choose level 9 and grip the steering wheel tight or hit level 1 for a gentle smooth acceleration.

AC MODE

Automatic control mode automatically selects the sensitivity level based on pedal pressure. If you are in traffic and accelerating gently the iDRIVE will automatically choose a reduced level of throttle response. If you accelerate hard for overtaking or just even just for fun the iDRIVE will choose a mode with an increased level of throttle response. Automatic Control mode is what makes iDRIVE the most intelligent throttle controller on the market.

Installation instructions (See image for reference):

Turn ignition off.
Unplug the connector plugged into the accelerator pedal assembly.
Plug the iDRIVE connector into the vehicle’s accelerator pedal. Be cautious not to force into position as this may result in bent pins in the plug. iDRIVE connector should fit easily into position. Although removing the accelerator pedal from the firewall is not required, it may make access to the plug easier.
Re-fit connector into the iDRIVE.
Using cable ties supplied, securely mount the iDRIVE cable in a position that will not affect the operation of the pedals.
Mount the control module on the dash in a position that is easy to access. You may want to check the position at night to ensure the display doesn’t affect night driving.

IDRIVE EVC201 WINDBOOSTER THROTTLE CONTROL SUITS MAKE & MODEL :

MITSUBISHI ASX 2009-
MITSUBISHI LANCER 2008-
MITSUBISHI OUTLANDER 2003-2008
MITSUBISHI OUTLANDER 2007-
MITSUBISHI GRANDIS
MITSUBISHI EVO X 2008-
FIAT FREEMONT 2011

What’s in the box
1 x Control Unit