IFixit IOpener Kit

This toolkit works with all tablets, smartphones, or other electronics needing heat application in the disassembly process.

• 2 x 4mm Steel Drive Bits
• Essential Tools, including: Spudger, Opening Tools, Suction Handle and Precision Tweezers
• iFixit’s 4mm Polymer Screwdriver Handle with magnetic bit socket, knurled grip and swivel top
• Designed for Tablet Case Opening
• For use with Electronic Devices

AVOID overheating of the iOpener

Heat the iOpener for thirty seconds.

Throughout the repair procedure, as the iOpener cools, reheat it in the microwave for an additional thirty seconds at a time.

Be careful not to overheat the iOpener during the repair. Overheating may cause the iOpener to burst.

Never touch the iOpener if it appears swollen.

If the iOpener is still too hot in the middle to touch, continue using it while waiting for it to cool down some more before reheating. A properly heated iOpener should stay warm for up to 10 minutes.

Remove the iOpener from the microwave, holding it by one of the two flat ends to avoid the hot center.

The iOpener will be very hot, so be careful when handling it. Use an oven mitt if necessary.

Improper use make cause malfunction of the device. No responsibility will be held by the tool provider.

What’s in the box
2 x 4mm Steel Drive Bits:
Phillips 100
Flathead 2.5mm
1 x Spudger,
1 x iOpening
1 x Tools,
1 x Suction Handle
1 x Precision Tweezers
1 x Battery Blocker
1 x Precision Bit Driver with Integrated SIM Eject Tool
1 x iFixit’s 4mm Polymer Screwdriver Handle with magnetic bit socket, knurled grip and swivel top