Kingston – 32GB ValueRAM

ValueRAM’s KVR26N19D8/32 is a 4G x 64-bit (32GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8,
memory module, based on sixteen 2G x 8-bit FBGA components.

The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers.

The electrical and mechanical specifications are as follows:

Features:
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Dual-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free

Specifications:

CL(IDD)
19 cycles

Row Cycle Time (tRCmin)
45.75ns(min.)

Refresh to Active/Refresh
350ns(min.)
Command Time (tRFCmin)

Row Active Time (tRASmin)
32ns(min.)

UL Rating
94 V – 0

Operating Temperature
0 C to +85 C

Storage Temperature
-55 C to +100 C

What’s in the box
1 x KVR26N19D8/32