Kingston Hyper-X Fury DDR3L-1866 4GB – Black

Kingston Hyper-X Fury DDR3L-1866 4GB – Black.

Features:
– JEDEC standard
– 1.35V and 1.5V Power Supply VDDQ = 1.35V and 1.5V 933MHz FCK for 1866Mb/sec/pin 8 independent internal bank
– Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6
– Programmable Additive Latency: 0, CL – 2, or CL – 1 clock 8-bit pre-fetch
– Burst Length: 8 (Interleave without any limit, sequential with starting address 000 only)
– 4 with TCCD = 4 which does not allow seamless read or write (either on the fly using A12 or MRS)
– Bi-directional Differential Data Strobe
– Internal (self) calibration: Internal self-calibration through ZQ pin (RZQ: 240 ohm 1%)
– On Die Termination using ODT pin
– Average Refresh Period: 7.8us at lower than TCASE 85C, 3.9us at 85C < TCASE 95C
– Asynchronous Reset Height: 1.291 (32.80mm) w/heatsink, single sided component

Specifications:
– CL (IDD) 10 cycles Row Cycle Time (TRCmin) 44.75ns (min.)
– Refresh to Active/Refresh 260ns (min.) Command Time (tRFCmin) Row Active Time (tRASmin) 32.125ns (min.)
– Maximum Operating Power TBD W
– UL Rating 94 V – 0 Operating Temperature 0o C to 85o C Storage Temperature -55o C to +100o C
– Power will vary depending on the SDRAM used