Kingston ValueRAM 16GB (1x16GB) DDR4-2666MHz CL19 1.2V Notebook Memory

Kingston KVR26S19D8/16 ValueRAM 16GB (1x16GB) DDR4-2666MHz CL19 1.2V Notebook Memory
16GB 2Rx8 2G x 64-Bit PC4-2666 CL19 260-Pin SODIMM

Description:
This document describes ValueRAM’s KVR26S19D8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

Featrures:
– Power Supply: VDD = 1.2V Typical
– VDDQ = 1.2V Typical
– VPP = 2.5V Typical
– VDDSPD = 2.2V to 3.6V
– Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
– Low-power auto self refresh (LPASR)
– Data bus inversion (DBI) for data bus
– On-die VREFDQ generation and calibration

Dual-rank:
On-board I2 serial presence-detect (SPD) EEPROM

16 internal banks; 4 groups of 4 banks each:
– Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
– Selectable BC4 or BL8 on-the-fly (OTF)

Fly-by topology:
– Terminated control command and address bus
– PCB: Height 1.18” (30.00mm)
– RoHS Compliant and Halogen-Free

Specifications:
– Brand: Kingston
– Series: ValueRAM
– Model: KVR26S19D8/16
– Capacity: 16GB (1x16GB)
– Speed: 2666 MHz
– Memory Type: DDR4
– Form Factor: SO-DIMM
– Voltage: 1.2 V
– Latency: CL=19
– Row Cycle Time: 45.75ns (Minimum)
– Refresh to Active/Refresh Command Time: 350ns (Minimum)
– Row Active Time: 32ns (Minimum)
– UL Rating: 94 V – 0
– Operating Temperature: 0°C – +85°C
– Storage Temperature: -55°C – +100°Ccles
– Row Cycle Time (tRCmin): 45.75ns(min.)
– Refresh to Active/Refresh Command Time (tRFCmin): 350ns(min.)
– Row Active Time (tRASmin): 32ns(min.)
– Maximum Operating Power: TBD W
– UL Rating: 94 V – 0

-55o C to +100oC

What’s in the box
1 x Kingston Valueram 16GB DDR4-2666 Sodimm (Notebook Ram)