Kingston ValueRAM 4GB DDR4-2400 Dimm

KVR24N17S6/4
4GB 1Rx16 512M x 64-Bit PC4-2400 CL17 288-Pin DIMM

ValueRAM’s KVR24N17S6/4 is a 512M x 64-bit (4GB) DDR4-2400 CL17 SDRAM (Synchronous DRAM),1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers.

FEATURES
Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP = 2.5V Typical
VDDSPD = 2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Single-rank
On-board I2 serial presence-detect (SPD) EEPROM
8 internal banks; 2 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
PCB: Height 1.23” (31.25mm)
RoHS Compliant and Halogen-Free

SPECIFICATIONS
CL(IDD) : 17 cycles
Row Cycle Time (tRCmin) : 45.75ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin) : 350ns(min.)
Row Active Time (tRASmin) : 32ns(min.)
Maximum Operating Power : TBD W
UL Rating : 94 V – 0
Operating Temperature : 0C to +85C
Storage Temperature : 55C to +100C

What’s in the box
1 x Kingston 4GB DDR4 2400MHz Desktop Memory Module (KVR24N17S6/4)