Maxim Integrated (MAX3430ESA+) Transceiver RS485, 2.97V-3.63V supply

Product Overview
The MAX3430ESA+ is a fault-protected fail-safe RS-485 Transceiver features ±80V protection from overvoltage signal faults on communication bus lines. Each device contains one driver and one receiver and the output pins can withstand faults, with respect to ground, of up to ±80V. Even if the faults occur when the transceiver is active, shut down or powered off, the device will not be damaged. The MAX3430 operates from a 3.3V supply and features a slew-rate-limited driver that minimizes EMI and reduces reflections caused by improperly terminated cables, allowing error-free data transmission at data rates up to 250kbps. The MAX3430 has a 1/4-unit-load receiver input impedance allowing up to 128 transceivers on a single bus and features fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open.

Internal slew-rate limiting
250kbps Data rate
Allows up to 128 transceivers on the bus
-7 to +12V Common-mode input voltage range
True fail-safe inputs
Hot-swap input structure on DE
Industrial Control Local Area Networks; Lighting Systems; Multimaster RS-485 Networks; PROFIBUS Applications; RS-422/RS-485 Communications

Applications
Communications & Networking, Lighting, Industrial

Product Information
Device Type: Transceiver
IC Interface Type: RS485
No. of Drivers: 1Drivers
No. of Receivers: 1Receivers
Supply Voltage Min: 2.97V
Supply Voltage Max: 3.63V
Driver Case Style: SOIC
No. of Pins: 8Pins
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C
Product Range: –
Automotive Qualification Standard: –
MSL: MSL 1 – Unlimited

What’s in the box
1 x Maxim Integrated (MAX3430ESA+) Transceiver RS485