Mecer Winner Pro 1000va 2u on-Line Rackmount Ups – Black

Features
True double-conversion online UPS
Wide input voltage range (110-300 VAC)
Input power factor correction 0.99
Output power factor 0.8
Converter mode available
ECO mode operation for energy saving (only available for 1-3KVA)
Hot-swappable battery design only available for 1-3KVA
Generator compatible
Adjustable charging current via LCD or software (1A ~ 6A)
Specifications

Colour
Black

PHASE
Single phase with ground

CAPACITY
1000 VA / 800 W

INPUT
Voltage Range
Low Line Transfer
160 VAC/140 VAC/120 VAC/110 VAC 5% (Ambient Temp.<35 C)
(based on load percentage 100% – 80 % / 80 % – 70 % / 70 – 60 % / 60 % – 0)

Low Line Comeback
175 VAC /155 VAC/ 135 VAC /125 VAC 5 % (Ambient Temp.<35 C)
(based on load percentage 100% – 80 % / 80 % – 70 % / 70 – 60 % / 60 % – 0)

High Line Transfer: 300 VAC 5 %

High Line Comeback: 290 VAC 5 %

Frequency Range: 40Hz ~ 70 Hz

Power Factor: 0.99 @ nominal voltage

OUTPUT
Output Voltage: 200/208/220/230/240 VAC
AC Voltage Regulation (Batt. Mode): 1%

Frequency Range (Synchronized Range): 47 ~ 53 Hz or 57 ~ 63 Hz
Frequency Range (Batt. Mode): 50 Hz 0.25 Hz or 60Hz 0.3 Hz
Current Crest Ratio: 3:1
Harmonic Distortion
3 % THD (Linear Load),
6% THD (non-linear load)
Transfer Time
AC Mode to Batt. Mode: Zero
Inverter to Bypass: 4 ms (Typical)
Waveform (Batt. Mode): Pure Sinewave
EFFICIENCY
AC Mode: 88%
Battery Mode: 83%
BATTERY
Battery Type: 12 V / 9 Ah
Numbers: 2
Typical Recharge Time: 4 hours recover to 90% capacity
Charging Voltage: 27.4 VDC 1%
INDICATORS
LCD Panel: UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions
ALARM
Battery Mode: Sounding every 4 seconds
Low Battery: Sounding every second
Overload: Sounding twice every second
Fault: Continuously sounding
PHYSICAL
Dimension, D x W x H (mm): 310 x 483 x 88 [2U] Net Weight (kgs): 12
ENVIRONMENT
Humidity: 20-90 % RH @ 0- 40 C (non-condensing)
Noise Level: Less than 50dB @ 1 Meter
MANAGEMENT
Smart RS-232/USB: Supports 2000/2003/XP/Vista/ 2008, Windows 7/8, Linux, Unix, and MAC
Optional SNMP (SNMP NETWORK CARD need to be purchased separately)
Power management from SNMP manager and web browser
NOTE 1: Derate to 80% of capacity in CVCF mode or when the output voltage is adjusted to 200/208VAC.
NOTE 2: If the UPS is installed or used in a place where the altitude is above than 1000m, the output power must be derated one percent per 100m.

The UPS is not designed to give continuous power to devices during loadshedding, merely a window period that allows a computer or other user to finalise the work at hand and shut down. It’s ability to do this is dependent on the number of devices connected to the UPS.
To establish what you can and cannot connect, calculate the total wattage you need to supply and ensure that the UPS you purchase meets that requirement.

PLEASE NOTE: A 12-month warranty on Electrical Components and 6-month warranty on batteries on all UPS

What’s in the box
1x ME-1000-WPRU
1x Power cable
1x RS-232 cable
1x USB cable