Multicomp Pro (DHSB 1) Butt Splice, Red, DHSB, 22 AWG, 16 AWG, 1.5 mm²

Butt Splice, Red, DHSB, 22 AWG, 16 AWG, 1.5 mm², PE (Polyethylene)

Product Overview
The DHSB 1 is a 15mm red sealed heat shrink Butt Splice with tin plated tubular copper terminal, high density PE insulation and a clear polyolefin sleeve. This splices provides a tough and long lasting environmental seal against immersion in solvents, oils, fluids and salt water. The wire insulation should be stripped to 8mm and then crimped into the ends of the butt splice. Hot air should then be applied to the sleeve until the tubing has shrunk to the cable size and the adhesive flows from the end of the splice, giving a fully sealed joint and additional strain relief. The DHSB series butt splice terminal accepts 22 to 18AWG wire gauge.

600V at 105°C Maximum electrical rating
19A Rated current
-40 to +105°C Temperature range

Applications
Industrial, Communications & Networking

Product Information
Insulator Colour: Red
Product Range: DHSB
Wire Size AWG Min: 22AWG
Wire Size AWG Max: 16AWG
Conductor Area CSA: 1.5mm²
Insulator Material: PE (Polyethylene)

What’s in the box
100 x Butt Splices