Murata Power (MGJ2D052005SC) Isolated Through Hole DC/DC Converter,

Isolated Through Hole DC/DC Converter, Gate Drive, 1:1, 2 W, 2 Output, 20 V, 80 mA

Product Information
Power Supply Approvals: Gate Drive
Output Power Max: 2W
Input Ratio: 1:1
Output Voltage – Output 1: 20V
Output Current – Output 1: 80mA
No. of Outputs: 2 Output
Output Voltage – Output 2: -5V
Output Current – Output 2: 40mA
Output Regulation: Unregulated
Isolation Voltage: 5.2kV
Input Voltage DC Min: 4.5V
Input Voltage DC Max: 5.5V
DC / DC Converter Output Type: Fixed
Input Voltage DC Nom: 5V
DC / DC Converter Type: SIP
DC / DC Converter Mounting: Through Hole
Width: 9.95mm
Height: 12.65mm
Depth: 19.65mm
Product Range: MGJ Series

Product Overview
The MGJ2D052005SC is a 2-output 2W board-mount isolated gate-drive DC/DC Converter ideal for powering high-side and low-side gate drive circuits for IGBTs and MOSFETs in bridge circuits. A choice of asymmetric output voltages allows optimum drive levels for best system efficiency and EMI. The device is characterized for high isolation and dv/dt requirements commonly seen in bridge circuits used in motor drives and inverters, while the device industrial grade temperature rating and construction gives long service life and reliability.

Ultra low coupling capacitance
Characterised dv/dt immunity
Characterised partial discharge performance
Power density 0.81W/cm³
5.2kVDC Isolation test voltage hi pot test
8% Maximum load regulation
50mVp-p Maximum ripple and noise
78.5% Typical efficiency
3.3pF Isolation capacitance
5.4ms Start-up time

Applications
Power Management, Industrial

What’s in the box
1 x Isolated Through Hole DC/DC Converter