NXP (2448375) Microcontroller MCU, ARM Cortex-M0+, 32bit, 30MHz, 16KB, 4KB

Product Information:
Product Range: LPC Family LPC82x Series Microcontrollers
Architecture: ARM Cortex-M0+
No. of Bits: 32bit
CPU Speed: 30MHz
Program Memory Size: 16KB
No. of Pins: 20Pins
MCU Case Style: TSSOP
No. of I/O’s: 16I/O’s
Supply Voltage Min: 1.8V
Supply Voltage Max: 3.6V
MCU Family: LPC
MCU Series: LPC82x
MSL: MSL 4 – 72 hours

Product Overview:
The LPC822M101JDH20J is a 32-bit ARM Cortex-M0+ Microcontroller operating at CPU frequencies of up to 30MHz. The LPC82x support up to 32kB of flash memory and 8kB of SRAM. The peripheral complement of the LPC82x includes a CRC engine, four I²C-bus interfaces, up to three USARTs, up to two SPI interfaces, one multi-rate timer, self-wake-up timer and state-configurable timer with PWM function (SCTimer/PWM), a DMA, one 12-bit ADC and one analog comparator, function-configurable I/O ports through a switch matrix, an input pattern match engine and up to 29 general-purpose I/O pins. State configurable timer (SCTimer/PWM) with input and output functions (including capture and match) for timing and PWM applications. Each SCTimer/PWM input is multiplexed to allow selecting from several input sources such as pins, ADC interrupt or comparator output.

ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC) CPU
System tick timer
AHB multilayer matrix
Serial wire debug (SWD) with four break points and two watch points
JTAG boundary scan (BSDL) supported
Up to 32kB on-chip flash programming memory with 64 byte page write and erase
Code Read Protection (CRP) supported
ROM API support boot loader, flash in-application programming (IAP) and in-system programming (ISP)
High-current source output driver (20mA) on four pins
Switch matrix for flexible configuration of each I/O pin function
Analog peripherals – Comparator with four input pins and external or internal reference voltage
Serial peripherals – Two SPI controllers with pin functions assigned through the switch matrix
Clock generation – Crystal oscillator with an operating range of 1 to 25MHz
Power control – Integrated PMU (power management unit) to minimize power consumption
Unique device serial number for identification

Applications:
Industrial, Consumer Electronics, Automation & Process Control, Motor Drive & Control, Lighting, Security

What’s in the box
1 x NXP (2448375) Microcontroller