Onsemi (MC74AC573DWG) Buffer / Line Driver, 74AC573, 2 V to 6 V, WSOIC-20

Product Overview
The MC74AC573DWG is an octal Buffer/Line Driver with 3-state outputs. It is a high-speed octal latch with buffered common latch enable (LE) and buffered common output enable inputs. It is functionally identical to the MC74AC373 but has inputs and outputs on opposite sides. It contains eight D-type latches with 3-state output buffer. When the latch enable (LE) input is HIGH, data on the Dn inputs enters the latches. In this condition the latches are transparent, a latch output will change state each time its D input changes. When LE is LOW the latches store the information that was present on the D inputs a setup time preceding the HIGH-to-LOW transition of LE. The 3-state buffer is controlled by the output enable (OE) input. When OE is LOW, the buffer is enabled. When OE is HIGH the buffer is in the high impedance mode but this does not interfere with entering new data into the latches.
Inputs and outputs on opposite sides allowing easy interface with microprocessors
Useful as input or output port for microprocessors
3-state Outputs for bus interfacing
Outputs source/sink 24mA
TTL Compatible inputs

Product Information
Logic Family / Base Number: 74AC573
Logic Device Type: Buffer, Inverting
Logic Case Style: WSOIC
No. of Pins: 20Pins
Supply Voltage Min: 2V
Supply Voltage Max: 6V
Logic IC Family: 74AC
Logic IC Base Number: 74573
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C
Product Range: –
Automotive Qualification Standard: –
MSL: MSL 3 – 168 hours

What’s in the box
21 x Onsemi (MC74AC573DWG) Buffer