PFERD TC Burr Set – 5pc 12mm diameter

PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, long service life and excellent stock removal rates.
The set contains five Tungsten Carbide Burrs in various shapes and sizes all with a 6mm shank consisting of PFERD’s COMBICUT suitable for universal use.

Set consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:
Cylindrical Without End Cut (ZYA 12mm x 25mm x 6mm Shank)
Ball Shape (KUD 12mm x 10mm x 6mm Shank)
Cylindrical Shape with Radius End “Bullnose” ( WRC 12mm x 25mm x 6mm Shank)
Pointed Tree Shape (SPG 12mm x 25mm x 6mm Shank)
Round Tree Shape (RBF 12mm x 25mm x 6mm Shank)

Advantages:
– Suitable for universal use.
– Good stock removal performance and tool life.
– Economic machining of a wide range of materials.
– Suitable for Electric as well as Pneumatic Tool Drives.

Operating Instructions:
Observe the following recommended rotational speed:
Steel and Cast Steel < 38 HRC: 12 000 – 16 000 RPM
Steel and Cast Steel > 38 HRC: 7 000 – 9 000 RPM
Stainless Steel: 7 000 – 9 000 RPM
Hard Non-Ferrous Metals: 7 000 – 9 000 RPM
Soft Non-Ferrous Metals: 7 000 – 12 000 RPM
Cast Iron: 12 000 – 16 000 RPM
Plastics and Other Materials: 12 000 – 24 000 RPM
Maximum Overhang = 10mm
Clamping Depth = 20mm
For optimum performance use machines with a power output of 300 – 500 watts.
Only use machines that are intended for use with the relevant tool.
The burr surface in contact with the workpiece should not exceed 1/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering.
Ensure correct and suitable personal protective equipment is worn while using the tool.
For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.

What’s in the box
One Tungsten Carbide Burr Set containing five Tungsten Carbide Burrs in 12mm Diameter consisting of different shapes all with a 6mm shank. The set is supplied in a sturdy plastic case with a screw cap that protects the Tungsten Carbide Burrs from dirt and damage.